Table of Contents
Advertisement
Quick Links
Glycol Chiller
Assembly, Operation, & Maintenance
Congratulations on your purchase, and thank you for selecting the Glycol Chiller from
Blichmann Engineering™. We are confident that it will provide you years of service and
many gallons of outstanding beer. This manual will familiarize you with the use,
assembly, and the sanitation procedures for the product.
PLEASE READ AND THOROUGHLY UNDERSTAND THIS MANUAL PRIOR TO USE
WARNING:
Sections labeled "Warning" can lead to serious injury or death if not followed. Please thoroughly read these sections
and understand them completely before use. If you do not understand them or have any questions, contact your
retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use.
CAUTION:
Sections labeled "Caution" can lead to equipment damage or unsatisfactory performance of the equipment. Please
read these sections thoroughly. If you have any questions, contact your retailer or Blichmann Engineering
(www.BlichmannEngineering.com) before use.
IMPORTANT:
Sections labeled "Important" should specifically be followed to ensure satisfactory results with the product.
ALLOW THE UNIT TO SIT UPRIGHT FOR 24 HOURS BEFORE PLUGGING IN.
Glycol Chiller V1
© Blichmann Engineering, LLC 2019
For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts
IMPORTANT INFORMATION
FOR IMPORTANT SAFETY INFORMATION!
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Blichmann Engineering Glycol Chiller
Summary of Contents for Blichmann Engineering Glycol Chiller
- Page 1 Blichmann Engineering (www.BlichmannEngineering.com) before use. CAUTION: Sections labeled “Caution” can lead to equipment damage or unsatisfactory performance of the equipment. Please read these sections thoroughly. If you have any questions, contact your retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use. IMPORTANT: Sections labeled “Important”...
- Page 2 Warning: Before use, allow the unit to sit for 24 hours. DO NOT PLUG IN After the glycol chiller has sat for 24 hours, add a mixture of 35% glycol and 65% distiled water. Plug in the glycol chiller. Set the controller on the front of the glycol chiller to the desired temperature.
- Page 3 System will save the modified temperature setting and exit the menu if no key is pressed in 5 seconds. 3. The way to switch between Celsius or Fahrenheit Press RST key and hold more than 3 seconds to automatically switch between ˚F and ˚C. • Glycol Chiller V1 © Blichmann Engineering, LLC 2019 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts...
- Page 4 Figure 4. Run the excess cable from the submersible pump out the back of the glycol chiller and place into the cable management cover (Figure 4). Plug the temperature controller into the outlet on the glycol chiller and plug the submersible pump into the temperature controller as shown in Figure 5.
- Page 5 A. Limited Warranty 1. Blichmann Engineering warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. Proof of purchase is required.
Need help?
Do you have a question about the Glycol Chiller and is the answer not in the manual?
Questions and answers