Summary of Contents for NewSound BW20
- Page 1 Operation Guide BW20 Xiamen NewSound Technology Co.,Ltd Neckband Hearing Amplifier Address: 1st and 2nd Floor, No.13 of Xiangyue Road, Torch Hi-Tech Industrial Development Zone, Xiang'An District, Xiamen, China.
- Page 2 THANKS Congratulations! Welcome to a New Life created by NewSound Neckband Hearing Amplifier. Please read this manual carefully before use. Intended use This instrument is an electronic device which amplifies sounds from the surrounding environment. This new generation neckband TV hearing amplifier enables hearing impaired people enjoy a colorful life.
- Page 3 ③ ④ ① ② ⑨ ⑩ ⑧ ⑥ ⑦ BW20 Neckband Hearing Amplifiers, TV hearphones TV002 Remote Microphone ⑥ Indication Light ⑤ Microphone ① Multi-function Button ① Power Button ⑦ TV002 Remote Microphone ⑥ Wallpost ② Volume Up ② Pairing Button ⑧...
- Page 4 Solid green Charge with USB cable 1: Charge with USB cable BW20: As shown above, please open the cover of USB port and insert the USB cable correctly for charging. TV002 remote microphone: Correctly connect the USB cable into the USB charging port between Power Button and Pairing Button.
- Page 5 There are two possible color indications. 2) Insert the earphones into both ears. Please note it is the hearing BW20 is not paired with TV002: Shining red and blue alternatively. amplifier mode when turned on. The volume is already set at BW20 is paired with TV002: Shining blue.
- Page 6 One beep sound (hearing amplifier mode) volume, you will hear “Di” sound. Program 2 TV watching (remote microphone) Two beep sound Kindly note: Every time you turn on BW20, it will revert to last time setting of program and volume.
- Page 7 6. Pairing with TV002 remote microphone Step 3: Place TV002 near to BW20 within 20cm and wait for 5 seconds. Short press “Multi-function button” to switch among four modes. BW20 provides four pre-setting program modes. Short press TV002 “Pairing button”, then the indication light on TV002 and...
- Page 8 FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the BW20 and is the answer not in the manual?
Questions and answers