Ata Configuration; Wan Parameters; Ntp Parameters - UTStarcom IAN-02EX Installation Manual

Telephone's Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual

ATA CONFIGURATION

Before proceeding with the configuration of your iAN-02EX ATA via WEB Browser, it is important that you have at your
disposal the Eutelia's username and password for the VoIP service that you obtained during registration or those you
have modified on the Eutelia's site.

WAN parameters

Click on "WAN IP" menu, then select "DHCP", insert the text "UTSTAR" and click on
OK
Note: If in your LAN are used static IP addresses it is necessary to select the option
"Static IP Address" and insert the values of "IP, Mask, Gateway, etc..." to avoid
conflicts on the network.

NTP parameters

Click on "NTP" menu, then insert the following values and choose OK
pag.7