Metal Drawer Box
Waste Container
Scan to watch the installation video
https://delivr.com/2hmwh
IMPORTANT:
Before you begin, make sure you familiarize yourself with all the
parts and fully read the instructions.
CUSTOMER SERVICE:
Toll free customer help line available weekdays between
7:00am and 6:00pm Central Time at 800-463-0660.
TOOLS NECESSARY:
Screw gun or Phillips screwdriver and tape measure. NOTE: If
screw gun has a clutch, set to lowest setting so as not to over
tighten and/or strip screws.
PARTS IDENTIFICATION:
C
F
A
Grey 35 or 50 Quart Trash Can
B
Top Cover
C
Back Panel
D
Bottom Panel
E
MDB500-185-21GR
F
#8x5/8 Pan head Wood Screw
G
Metal Runners with Screws
Installation Instructions for
the CAN-MDB5 Series
Double/Single Can 35 qt/50 qt
Detach the slides from the metal wall drawer box.
A
B
D
E
G
1 Single/2 Double
1 pc
1 pc
1 pc
1 pc
4 pcs
Install the front mounting brackets on the front using the screws provided and according to the dimensions above.
2 pcs
Trash Systems
STEP 1
Detach the Slides
Install the Front Mounting Brackets
STEP 2
Remove the Mounting Brackets
Move this black piece to the
side to reveal the screw hole
Use a screwdriver to turn the mechanism in the drawer box that
will release the mounting brackets that are on the inside.
STEP 3