Advertisement
9. When the All done! Screen appears, the camera has been added to your HomeSeer HS3 system! This can be seen in the
Cameras section of HomeSeer Mobile and in the HS3 web interface from Tools > Setup, under the Cameras tab.
Snapshot URL
http://user:password@IPaddress/mjpeg/snap.cgi?chn=1
Changing the Username and Password
The username cannot be changed and will always be admin. To change the admin password, you must factory reset the cam-
era, re-add the camera with the above steps.
Removing the Camera from HomeSeer
In the HS3 web interface, navigate to Tools > Setup, then click on the Cameras tab. Identify the camera you would like to re-
move, then click the
symbol at the end of the row of the camera to be removed. If the camera is still powered on and con-
nected to your network, the camera will re-appear.
Performing a Factory Reset
To perform a factory reset on the HS-CAM-O, press the reset button exposed, press it for 10 seconds and the red LED will start
to blink quickly, indicating that the reset has been completed. This will revert the password to the defaults printed on the stick-
er located on the bottom of the camera and reset the network settings.
Installation without a HomeSeer system
The HS-CAM-O is also compatible with the iSmartViewPro app. If the camera will be used with HomeSeer, then it is not recom-
mended or necessary to download this app. Otherwise, follow the instructions below to set up your camera.
1. Download iSmartViewPro from the Play Store in Android or App Store in iOS.
2. Open the app, select Add Camera, then select whether the camera will be connected via Ethernet or Wi-Fi. Regardless of
connection method, the app will then need to scan the QR code on the bottom of the camera.
3. Press the reset button on the camera for 3 seconds until the LED indicator on the Ethernet connection cable stops blinking.
4. On the next screen, only the camera name should be changed. After pressing Next, a QR code will be created. Increase the
brightness of your mobile device to max, then place the QR code directly in front of the lens of the HS-CAM-O. Slowly
move the screen away from the camera until the code is recognized.
The camera is now connected to the app! Tap the camera name to view the feed.
5.
SPECIFICATIONS
Wi-Fi Compatibility
Night Vision Distance
Camera Resolution
Outdoor Rating
HomeSeer | 10 Commerce Park North, Unit 10 | Bedford, NH 03110 | HomeSeer.com | Doc: HS-CAM-O-en-v3.0
2.4 GHz /b/g/n
82'
25m
1080p (1920x1080)
IP66
Power Consumption
Lens Info
Dimensions
DC 12V 7W
4mm lens
36 IR LED's
7.1" x 2.6" x 2.6"
180 x 67 x 67mm
Advertisement
