Extended Cooling Function - Princess 282600 Manual

• Press the TIMER button (5) 1x to set the
time to 40 minutes. The digital display (2)
shows "40:00".
• Press the TIMER button (5) 2x to set the
time to 30 minutes. The digital display (2)
shows "30:00".
• Press the TIMER button (5) 3x to set the
time to 10 minutes. The digital display (2)
shows "10:00".
• Press the TIMER button (5) 4x to set the
time to 50 minutes. The digital display (2)
shows "50:00".
Starting and stopping the
appliance (fig. A)
• If the time is set, press the START/STOP
button (4) to start the mixing process. The
mixing indicator (6) comes on. The digital
display (2) counts down during the process.
• After 2 minutes, the cooling process will
start automatically. The cooling indicator
(7) comes on.
• To interrupt the process, take one of the
following actions:
- Press the START/STOP button (4) for
2 seconds.
- Press the POWER button (3).
• If the process is completed, a buzzer will
sound 10 times to indicate the end of the
process. The digital display (2) shows
"00:00".
Adjusting the time (fig. A)
During use
If the appliance is operating, the time can be
adjusted using the TIMER button (5).
The default time is 50 minutes.
• Press the TIMER button (5) 1x to increase
the time by 5 minutes.
• Each time the TIMER button (5) is pressed,
the time will be increased by 5 minutes.
After use
If the dessert is of insufficient quality after the
process is completed, the appliance can be
restarted using the START/STOP button (4).
• Press the START/STOP button (4) for 2
seconds.
• If necessary, press the TIMER button (5)
to set the time
• Press the START/STOP button (4) to start
the appliance.

Extended cooling function

The appliance is equipped with an extended
cooling function. If the appliance is not switched
off within 10 minutes after the process is
completed, the extended cooling function will
be activated automatically. The cooling
function (withouth the mixing function) will first
be activated for 10 minutes and subsequently
deactivated for 10 minutes. After 60 minutes,
the extended cooling function will be
deactivated automatically.
Hints for use (fig. B & C)
Caution! Keep the bowl lid (12) and the bowl
lid cover (13) closed during use.
• Prepare the ingredients.
• Place the appliance on a stable and flat
surface.
• Put the ingredients into the removable bowl
(9).
Note! Make sure that the removable bowl (9)
is not filled with ingredients for more than 80%
of the capacity. The dessert expands during
the process.
• Place the seal ring (8).
• Mount the removable bowl (9).
• Mount the mixing arm (11).
• Mount the bowl lid (12).
• Mount the bowl lid cover (13).
• Mount the motor unit (14).
• Switch on the appliance.
• If necessary, set the time for the process
for making desserts.
• Start the process for making desserts.
• Keep the bowl lid (12) and the bowl lid
cover (13) closed during the process as
much as possible. Only open the bowl lid
(12) and the bowl lid cover (13) to check
whether the process is finished.
• After use, switch off the appliance and
remove the mains plug from the wall socket.
17