Power Lift 71000D Assembly Instructions Manual

Belt Squat

Assembly notes:

Fasteners provided to assemble machine:
(26) 1/2"-3 1/4" Bolts
Tools required (Not Included):
- 3/4" Open-End Wrench
- 3/4" Socket
- 1/2" Open-End Wrench
- 1/8" Allen Wrench
- 13 mm Open-End Wrench
When assembling unit DO NOT tighten any
fasteners until all components have been
bolted together.
POWER LIFT
PART NUMBER
71000D assembly cover
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
REV.
R
Date