Download Print this page

Pyle Hurtle Tour PSCOOT33 User Manual page 5

Electronic smart scooter

Advertisement

4. Battery Maintenance
This is information on how to charge and maintain the battery. Please follow these directions if you'd like to extend the
battery life to its longest potential.
4.1 Low Battery
When the power indicator light is red light and flashing, you must stop driving and charge your scooter. The scooter will
begin to skip/stop when it is running out of battery, so it is important that when it is low battery that you stop driving
and begin to charge. Accidents/injuries could occur if you force the scooter to drive while it is low battery.
Do not use the battery/scooter, if:
1. It begins emitting a smell or gets too hot.
2. Any liquid/materials leak out.
DO NOT remove/replace the battery at any time; this can only be done by an experienced/designated technician.
Don't touch the battery if any liquid/materials leak out.
Do not let any children or animals near the wiring or scooter while it charges. Parental supervision is necessary.
4.2 Charging
Make sure the scooter is completely dry before charging. Open the charging cover of the scooter.
Plug the socket of the charger to the power supply (110-220V; 50-60Hz), make sure the green indicator light of the
charger is on, and then connect the charger with the scooter.
When the indicator light on the charger turns red to green, that means the battery is full charged. Overcharging will do
harm to the battery, so please make sure to unplug the scooter from the charger when it is done.
Please pay special attention to use the correct plug; using the wrong one will damage the battery or the scooter.
The suggested charge time for the scooter is 2 hours; taking the scooter off of the charger before it is fully charged will
shorten the lifecycle of the battery.
Do not charge when the charge port is moist or damaged.
4.3 Battery
To keep the scooter in the best efficiency, make sure the battery works in the suggested working temperature range (-15
to 40 degrees).
Make sure the scooter is in the recommended temperature when charging, extreme
Cold or heat, charging time will be longer and maybe cannot be full charged.
4.4 Specifications
Item
Battery Charge Time
Voltage
Max Charge
Standard capacity
Storage Temperature
Storage humidity
Size (L x W x H)
Weight
Power Supply
Motor
Weight Limit
Parameter
2-3 hours
36V
42V
4400mAh
0-40 C / 6 month
5%-95%
22.9'' x 7.3'' x 7.0''
22.04 lbs.
110/220V
250 Watt
275 lbs.

Advertisement

loading