Page 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Model: PP D2 To comply with the FCC RF exposure compliance requirements, this device and its antenna FCC ID: N26-PPVPPD2 must not be co-located or operating to conjunction with any other antenna or transmitter.
Operation for Audio USB Cable Connector cellular phone or GPS device before using. Headset Embedded Battery Charging PP D2 stereo is a Bluetooth® system for helmets, enabling you to talk with LED Light Indicator passenger or other riders, and entertainment while riding your motorcycle.
Installation 1. Mouthing the Clip The headset clip must be mounted onto the helmet. Once mounted, the headset unit can be attached or detached from the headset clip at any time. Even remove it for charging and storage. Note: We recommend that you remove the headset from the helmet when not in use. 2.
(Note: *actual range will depend on weather conditions, terrain and presence of obstacle) Water and dust resistance Stereo functions PP D2 body is designed for water and dust resistance. Bluetooth® A2DP music play/Support A2DP function. Adapts to sudden changes in weather.
Double click Volume Down(-), then the Mobile phone will dial out the latest called number. Auto Off When PP D2 is not in use or paired with any device, it will automatically turn 6. Voice Dial: While connecting with Bluetooth headset and Mobile phone, headset off after 10 minutes to safe power.
1.4 To pair with another headset, repeat the above steps please. 2. Track forward ( Note: We only ensure that PP D2 headsets can be paired successfully between our PP D2 brand headsets. ) Click Volume + to select next music.
FM Radio Operation 4. Volume control Press and hold Volume + to turn up the music volume; press and hold 1. Turn On/Off FM Volume - to turn down your music volume. Release the Button till you feel Quick double press the MFB can turn On/Off the FM Radio receiver. good.
Red light flashing twice / per 60 seconds Battery is low Priority Switching: Red light flashing Headset is being charged Solid red light Headset is charging completely PP D2 Bluetooth® Headset – Priority order: Note: While charging, solid red light will be off to indicate charging complete.
Mobile phone battery for a few seconds, and then put back Bike-to-Bike intercom communication up to 500m/1640ft. the battery, turn on your Mobile phone, restart the Bluetooth function and Rider-to-passenger communication will all Propoint Bluetooth® headset. search the Bluetooth device. Now you can reconnect with your Bluetooth (full compatibility)
Page 10
RDS functionality. (Automatic selection of strongest FM radio signal while on the go ) control, the PP D2 system will automatically increase and reduce the 8 stations memory with search and store function. volume according to speed and ambient noise Automatic radio muting during incoming call.
Need help?
Do you have a question about the PP D2 and is the answer not in the manual?
Questions and answers