Advertisement
Table of Contents
R O LL S Y S ® LED
For a video guide to help with the following steps please
go to the following URL and click on how to videos:
www.youtube.com/user/LazerSport
battery
1- STILL MODE
1- STILL MODE
2 - FLASHING MODE #1
3 - FLASHING MODE #2
4 - FLASHING MODE #3
1. Insert the battery pack
into the rear of the Rollsys®
system, with the green PCB
board facing outwards.
2. Insert the clear silicone
battery
cap into the rear of the
Rollsys® system, sealing
the electronics.
battery
1. Press the light button.
1- STILL MODE
2 - FLASHING MODE #1
3 - FLASHING MODE #2
4 - FLASHING MODE #3
5 - OFF
1. Installation
2. Light modes
1: Constant mode
2 - FLASHING MODE #1
3 - FLASHING MODE #2
4 - FLASHING MODE #3
2: Flash mode
5 - OFF
3: Off
5 - OF
Advertisement
Table of Contents
Summary of Contents for LAZER ROLLSYS LED
- Page 1 R O LL S Y S ® LED 1. Installation For a video guide to help with the following steps please go to the following URL and click on how to videos: www.youtube.com/user/LazerSport 1. Insert the battery pack into the rear of the Rollsys® system, with the green PCB board facing outwards.
- Page 2 R O LL S Y S ® LED 2. How to change the battery 1. Pull out the silicone cap from the rear of the Rollsys® system. 2. Remove the 2. Slide the 3. Replace the 4. Follow installation battery pack. batteries out of LR41 button cell steps in reverse...
Need help?
Do you have a question about the ROLLSYS LED and is the answer not in the manual?
Questions and answers