1. Manuals
  2. Brands
  3. Altec Manuals
  4. Farm Equipment
  5. PC20
  6. Manual

Altec PC20 Manual

Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Congratulations!
You are now the proud owner of an ALTEC agricultural machine. Thank you for choosing
one of our products.
Our design team's top priority is to improve quality, so please do not hesitate to send us
any remarks likely to improve our products.
Your new machinery is designed to give you years of faithful service.
PC20
WARRANTY: PLEASE FILL IN AND RETURN THE WARRANTY FORM ENCLOSED
WITHIN EIGHT DAYS OF DELIVERY.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PC20 and is the answer not in the manual?

Questions and answers

Related Manuals for Altec PC20

Summary of Contents for Altec PC20

  • Page 1 Congratulations! You are now the proud owner of an ALTEC agricultural machine. Thank you for choosing one of our products. Our design team's top priority is to improve quality, so please do not hesitate to send us any remarks likely to improve our products.
  • Page 2 SAFETY INSTRUCTIONS YOU WILL FIND THIS ADHESIVE LABEL ON ALL OUR MACHINERY. IT MEANS YOU MUST READ THIS BOOKLET BEFORE USING YOUR NEW EQUIPMENT. IT IS DANGEROUS TO USE THIS DEVICE IF YOU HAVE NOT READ THE RELEVANT SAFETY INSTRUCTIONS. GENERAL •...
  • Page 3 POSTS, OVER-HANGS, GATES, ELECTRIC CABLES, ETC.). • HARDWARE, CLIPS AND PINS MUST ONLY BE REPLACED BY ORIGINAL SPARE PARTS. MODIFICATION OF THE MACHINE OR ITS USE FOR ANY PURPOSE OTHER THAN THAT RECOMMENDED SHALL UNDER NO CIRCUMSTANCES RENDER ALTEC SAS LIABLE FOR ANY ENSUING DAMAGE.
  • Page 4 Weight: 390 kg MACHINE IDENTITY PLATE Every machine carries an identity plate. Please refer to your machine's serial number and year of manufacture in all correspondence. On the PC20, the identity plate is located rear on the frame.
  • Page 5 MOUNTING THE PC20 ON THE LOADER • The PC20 handler must be placed vertically on flat, stable ground. • Slide the mounting attachment into the PC20 tube sections. Adjust the gap between the two sides with respect to the loader.
  • Page 6 STATEMENT OF COMPLIANCE ALTEC Manufacturer: 12200 MORLHON - FRANCE PC20 Hereby states that the new machinery identified hereafter as complies with applicable hygiene and safety rules. Signature: Pierre CALVET Chief Executive Officer.

Table of Contents