IHP RDV-BRK-STD Installation Instructions

INSTALLATION INSTRUCTIONS FOR INSTALLING FIREBOX PANEL KITS. FOR USE
wITh RAVENNA™, DRI3030TEN, DRI3030TENC AND SDVI40 GAS FIREPLACE INSERTS
KIT CONTENTS (See Figure 1)
Please ensure that all these parts are in the packaging.
1 ea. Rear Brick Panel (A),
1 ea. Left Brick Panel (B),
1 ea. Right Brick Panel (C),
2 ea. Retaining Brackets (D)
1 ea. Instruction Sheet
NOTE: Zen Garden, Tan Brick, Red Brick, all ship with the retaining
f i r e - p a r t s . c o m
brackets in the kit. Architectural Stone panels use the bracket that ships
pre-installed on the unit.
CAUTION: The firebox panels are required for your appliance
to function correctly and safely.
Firebox Panel Kits
Zen Garden Tan Brick
Cat. No. Model
h7979 RDV-BRK-STD
h7981 RDV-BRK-ARChSTONE Architectural Stone
h7980 RDV-BRK-RED
h8453 RDV-ZG
TOOLS NEEDED
5/32" Allen Wrench Or T-Handle Wrench
GENERAL INFORMATION
All of these parts may scratch and bend, great care should be used
in handling them.
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installation.
ALL wARNINGS AND PRECAUTIONS IN ThE INSTALLATION AND
OPERATION MANUAL PROVIDED wITh ThE APPLIANCE APPLY TO
ThESE INSTRUCTIONS.
TURN OFF ThE APPLIANCE AND ALLOw IT TO COMPLETELY COOL
BEFORE PROCEEDING.
C
A
B
D
Red Brick
Architectural Stone
Description
Tan Brick
Red Brick
Zen Garden
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE
775266M
Rev. A, 12/2013
Check the contents of the kits upon receipt and check for any damaged
or missing parts. If there is hidden damage, notify your freight company
or IHP dealer immediately.
INSTALLATION INSTRUCTIONS
If logs are not installed according to the log installation instructions,
flame impingement and improper combustion could occur and result in
soot and/or excessive production of carbon monoxide (CO), a colorless,
odorless, toxic gas.
The size and position of the log set is critical to achieve a safe, reliable
and attractive flame pattern. Any attempt to use a different log set in the
fireplace will void the warranty and will result in incomplete combustion,
sooting and poor flame quality.
Step 1. Remove the glass door per instructions in the installation and
operation manual.
Step 2. Remove the log rack (2 screws) and install the rear log on the
retainer. See Figures 1 and 2.
Step 3. Remove brick retainer bracket and install rear panel. Reinstall
the log rack with the rear log. IMPORTANT!!! SCREwS PASS
ThROUGh ThE LOG RACK AND ThE BURNER PAN.
Figure 1 - Log Rack Screws
HEARTH PRODUCTS
KITS AND ACCESSORIES
FIREBOX PANEL KITS