Installation shall be carried out according to the standard installation manual SGS, with the exception of the differences
mentioned in this document.
1. GENERAL ASSEMBLY SGS-T (2+0)
1 -
leaf 1 = back leaf (by the wall)
2 -
leaf 2 = front leaf (leaf further from the wall)
opening direction of the leaf
02/2019
SPECIFICS OF INSTALLATION SGS-T
(right variant in the drawing)
Somati
Somati
system s.r.o.
system s.r.o.
bracket of the pulley on the top edge
A -
profile without tensioner
bracket of the pulley on the top edge
B -
profile with tensioner
C -
anchor profile of the wire rope
D -
wire rope holder
E -
telescopic guide
F -
floor guide SGS-T
Somati system s.r.o., Jihlavská 510/2c, 664 41 Troubsko
IČ: 29260159, DIČ: CZ29260159
tel: +420 547 427 011, www.somati-system.cz
Need help?
Do you have a question about the SGS-T and is the answer not in the manual?
Questions and answers