Advertisement
Battery Installation
NOTE: THIS UNIT DOES
NOT CHARGE iPOD
Use correct insert for all iPod
iPhone and MP3 players
NOTE: ADJUST iPod VOLUME
TO AVOID DISTORTION
nano is docked with the screen
facing the clear window
Power Button
Headphone Jack
Headphone Jack
Top Panel
Strap
Listen To Audio Device
Using the iHM6
Thank you for purchasing the iHM6. Designed to work with your
iPod, iPhone, MP3 player or any audio device, this system
provides high quality audio that invites your music to come out
and play. Please read the instructions carefully before operating
the unit and keep for future reference.
Installing/Replacing Batteries
1. Open the battery compartment door located on the inside
of the unit.
2. Insert 4 "AA" (LR6) batteries, checking that the + and – ends
of the batteries match the diagram inside the battery
compartment.
3. Close the compartment cover.
For Best Performance
• We recommend the use of alkaline batteries for longer life.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Make sure you dispose of batteries properly (see your local
regulations).
Listening to an iPod, iPhone or other
MP3 player/audio device
1. Unzip the iHM6. Plug the end of the built-in audio patchcord
into the headphone or Line-out Jack on your device.
For nano: Place the included nano insert into the dock. With
your nano connected to the audio plug, place the nano into
the insert with the nano screen facing the clear window. For
extra support, place the remaining insert in the dock on top
of the nano insert.Pull the elastic retaining strap until the nano
is firmly in place against the clear window, then secure using
the velcro fastener.
For iPod/other devices: With your iPod connected to the
audio plug, place your iPod in the dock facing the clear
window. Place the iPod insert into the dock behind the iPod.
Secure the insert and iPod in place with the retaining strap.
2. Turn on your iPod, iPhone, MP3 player or other audio device,
press Play and set desired volume on the device.
3. Press the Power Button located on the top of the unit to ON.
To listen to sound privately, connect headphone(s) to the
headphone jacks. Doing so will cut off the speakers.
4. Remember to turn unit OFF when not in use to save
batteries, and to turn off your iPod, too.
NOTE: Connected iPhones create audio interference noise
when a call is received. Turn on Airplane mode to
disable phone while playing music.
Maintenance
• Place the unit away from sources of direct sunlight or
excessive heat.
• Protect your furniture when placing your unit on a natural
wood and lacquered finish.
• Clean your unit with a soft cloth moistened only with mild
soap and water. Stronger cleaning agents, such as Benzine,
thinner or similar materials can mar the surface.
Advertisement
