Advertisement
PRACTICE 512-6261-200
6.0 CONNECTIONS
6.01 The CONFERENCE 2000 is available as
follows:
• An optional NE-D16QD
mounting
cord
(standard on QTAF2C3)is
available for con-
nection to single-line or multiline
telephone
sets. The NE-D16QD cord
converts the
modular connection to spade-tip connectors.
• Equipped with a 15-pin connector which is
compatible with LOGIC-style telephone sets.
6.02
Refer
to Tables B and C
for
CONFERENCE
2000 connection information.
TABLE B
CONNECTION INFORMATION (FIGURES)
FIGURE
DESCRIPTION
3
Connections for block diagram of CONFERENCE 2000
4
Connections for block diagram of CONFERENCE 2000 with optional microphone
mixer and customer-provided microphones
5
Connections for block diagram of control module equipped with NE-D16QD cord
6
Connections for block diagram of control module equipped with a 15-pin connector
7
Connections for single-line telephone set rotary dial
8
Connections for single-line telephone set DIGITONE* dial
9
Connections for single-line telephone set Phase 1 DIGIPULSE* dial
10
Connections for W.E. Co. single-line telephone set DIGITONE
dial, or equivalent
11
Connections for single-line telephone set Phase II DIGIPl]LSE
diai
less
polarity guard
12
Connections for multiline key telephone set DIGITONE dial
13
Connections for multiline key telephone
set
Phase II DIGIPULSE
di~
less
polarity
guard
14
Connections for W.E. Co. multiline key telephone set with pushbutton
dial equipped for
on-hook dialing
15
Connections for multiline key telephone set with rotary dial
16
Connections for auxiliary transfer contacts
17
Connections for external station busy lamp or relay control
• DIGITONE and DIGIPULSE are trademarks of Northern Telecom Limited
Page 6
Advertisement
