Kiramek OB-23 Manual

OB - 23 MANUAL
OBD 3 - Way Splitter
Thank you for purchasing the OB-23 OBD 3-Way Splitter. Please read this manual in its
entirety before using the product. Be sure to store this manual in a safe place, as you may
need to reference it in the future.
WARNING
After connecting the OB-23 harness and mounting it to the car, take care that it does not
come in contact with the vehicle's moving parts, especially the brake and accelerator
pedals. Failure to comply with this may result in an electrical short, fire, or vehicle
breakdown that could result in bodily injury and/or property damage.
DANGER
Mishandling may cause bodily harm!
This product was designed for use with our firm's DIGI-LINK CAN-BUS products. When
•
attaching third-party devices to the OB-23, you must ensure those devices will not draw
more electric current than specified by your vehicle's CAN wiring.
NEVER attempt to modify the harness, as such could result in a short and bodily harm.
•
Connect the OB-23 only in accordance with this MANUAL.
•
This product is not waterproof, splash-proof, or dust-proof. Take care to prevent water,
•
dirt, oil and other impurities from entering the product; otherwise malfunction to the
product could occur, as well as vehicle damage and possible bodily harm.
PRODUCT DESC.:
Warranty Period:
Date of Purchase*:
Customer Info.*:
Seller Info.*:
* Please fill in these marked sections above completely.
Approval Stamp
Ver. 01152015
NOTE: Warranty Claims not accepted without valid
Approval Stamp and/or dated proof of purchase.
PRECAUTIONS
PLEASE READ THOROUGHLY BEFORE USE
NOTE
This product is primarily intended for use on Japanese vehicles within Japan.
•
Our company shall not be held liable for traffic accidents that occur with the OB-23 installed.
•
Specifications of this product are subject to change without notice.
•
NEVER exceed the electrical specification of the harness wires and OBD plug when
•
attaching third party devices to the OB-23.
We do not guarantee that all OBD devices you attach will be compatibile with each other.
•
IMPORTANT
When using the OB-23 in conjuction with other DIGI-LINK products from our firm, take
•
care not to attach third party devices to the OB-23 which draw excessive current. Such
could result in large voltage drops that may temporarily impair one or more of the
DIGI-LINK devices.
There may be some vehicles in which the factory plastics or upholstery interferes with
•
the proper mounting of the OBD plug on the OB-23. Carefully examine your car prior to
purchase to ensure the OB-23 can be mounted in your car to your satisfaction.
PRODUCT WARRANTY CLAIM
OBD 3-Way Splitter
6 Months
(validated only by dealer and/or dated proof of purchase)
Year: , Month:
Name:
Address:
Phone: Email:
Name:
Address:
Phone: Website:
Manufacturer: KIRAMEK, Inc.
9-183-1 Itayama-cho,
Handa-shi, Aichi-Ken 475-0936 JAPAN
+ 81-569-20-5585
Contact TEL:
Product or vehicle failure could result from ignoring the following:
OB-23
MODEL:
, Day:
( )
Operating Hours (ex. Sat./Sun./Holidays):
10:00AM ~ NOON, 1:00PM ~ 4:00PM