BG Electrical Smart! Setup Manual

Your life Connected, Your life Smarter
Take control of your
power from anywhere
Compatible with:
1. Install the BG Home App
Download the BG Home App for your Android or iOS device.
Scan the QR code below

3. Socket setup

On the App select 'Add device'
Ensure that your Smart Socket is connected
to the power supply as per the 'Wiring
Instructions' supplied. After the initial power
up both switch LED indicators will illuminate
RED and start to blink and the socket will be
ready for setup.
Socket Setup
Press and hold button A for 5 seconds.
The socket will then enter Wi-Fi
configuration mode and the indicator
RED flashing quickly.
illuminated
Once set up your mobile device will
indicate a successful connection and
the Red indicator on the socket will
turn off.
Scan the QR code below
A B
Control your Power by:
Mobile
Use with the
BG Home app
2. Account creation
Follow the on-screen advice to set-up an initial account
If you have a BG Home account already skip to "Add Device"

3. Adaptor setup

On the App select 'Add device'
Ensure that your Smart Adaptor is connected to the power supply.
After the initial power up the switch LED indicator will illuminate
RED
and start to blink and the adaptor will be ready for setup.
Adaptor Setup
Power control on the adaptor
can be manual or 'smart'
The power button will illuminate
BLUE for ON
POWER BUTTON
You can now plug in the device you would like to control.
If these setup procedures fail, follow the "AP Config" setup
and the step by step instructions on the App.
Setup Guide
Voice
Touch

Device Setup

Press and hold button for
5 seconds. The adaptor
will then enter Wi-Fi
configuration mode and the
indicator illuminated
flashing quickly.
Once set up your mobile
device will indicate a
successful connection and
the Red indicator on the
socket will turn off.
You can now plug in the
device you would like to
control.
RED