Table of Contents
Advertisement
1.
Checkbox
Place a check mark beside MAS-A100 units that you want to register in this application.
2.
[Model name]
Displays the model name.
3.
[IP address]
Displays the IP address of each MAS-A100.
4.
[Flash]
Press the icon to start the LED of the MAS-A100 flashing.
5.
[Path 1], [Path 2], [Path 3]
Enter information, such as name of building, floor number, and room name.
[Path 1] input is mandatory. Enter a character string comprising 4 to 16 characters.
Character strings up to 16 characters can be entered in [Path 2] and [Path 3]. If a character string is entered in [Path
3], input in [Path 2] becomes mandatory.
The following characters are valid.
Alphabetic characters
Numeric characters
Symbols ( ! $ % ' ( ) = - ~ ^ | @ ` [ { } ] _ / ? < > + * . )
Character strings entered in [Path 1], [Path 2], and [Path 3] are used by this application as the names of groups
displayed on the [Group] pane for grouping microphones. Normally, MAS-A100 units located within the same room
must have the same entries for [Path 1], [Path 2], and [Path 3].
14
Advertisement
Table of Contents
