Table of Contents
Advertisement
Transporting the appliance
en
Insert all 4 transit bolts.
2.
Insert the screws and tighten them
3.
with a wrench (WAF 13).
Clip the mains cable securely into
4.
the holders.
48
Clip the hose securely into the
5.
holders.
Before switching on the appliance
again:
Notes
The transit bolts must be removed.
■
Pour approx. 1 litre of water into
■
compartment II and start the
Schleudern/Abpumpen (Spin/Drain)
programme.
This will prevent detergent from
flowing straight into the drain during
the next wash.
Advertisement
Table of Contents
