Siemens LR96CAQ20 User Manual And Assembly Instructions page 21

Press together the cable duct at the sides and at-
4.
tach.
Fit the cover frame and screw it firmly in place.
5.
Fitting the filter cover
WARNING ‒ Risk of injury!
¡ Components inside the appliance may have sharp
edges.
Wear protective gloves.
▶
¡ Risk of injury when opening and closing the hinges.
Keep your hands away from the hinges.
▶
Open the hinges on the filter cover.
1.
25
Mount the filter cover on the designated screws and
2.
push it backwards/forwards depending on the key
hole opening into the narrow section.
Tighten the fastening screws on the hinges.
3.
Check whether the appliance frame is lying flush.
4.
Tighten the screws once again if necessary.
Insert the grease filters.
5.
To avoid causing damage, do not bend the grease
filters.
Swing the filter cover up and ensure that it engages.
6.
Installation instructions en
21