Pyle WATCHDOG PLMCWD15 Manual page 5

* Optional feature
REMOTE ENGINE START (PLMCWD25/75)
Press button 3 twice, the engine will start and run
for 8 minutes. Engine will turn off after 8 minutes
and alarm will return to previous status. During the
8 minutes, if you insert the key and turn to ON, the
engine will keep running.
KEYLESS DRIVING (PLMCWD25/75)
To drive the motorcycle after Remote Starting: Press
button 3 one time, siren will chirp once for confir-
mation, turn ignition key to the ON position.
NOTE: Do not turn the key to the START position as
the engine is already running. Once the ignition key is
turned on, shift the motorcycle into the proper gear
and you may now drive the motorcycle ...into the sun-
set!
NOTE: If you press Button 2 prior to turning on igni-
tion, engine will turn off.
REMOTE ENGINE SHUTDOWN
If the motorcycle has been remotely started and
you desire to turn the motorcycle off, simply press
button 2
LED INDICATOR – 2-WAY ONLY
In arming mode, the LED indicator will flash once
every 2 seconds. If the alarm was triggered while
away from the motorcycle, the LED will flash twice
every 2 seconds prior to disarming the alarm.
REMOTE CONFIRMATION
The built-in LCD display provides visual confirma-
FUNCTIONS
tion of system operations and status.
After a function such as arming is selected, the LCD
display will show confirming icons to indicate that
the function has taken place.
The LCD display shows any intrusion attempts as
they occur. In addition to LCD display, the 2-way
transmitter also provides audible and vibration
alert in case the display is out of view. For nighttime
use the LCD is equipped with a backlight feature.
SYSTEM STATUS RECALL
Real-time system status can also be recalled at any
time by pressing transmitter button 3 for less than
one second. The system's current status will be
shown on the LCD display
SETTING CLOCK
Press Lock and Unlock button together for 2 sec-
onds, the transmitter will emit an ascending tone,
the hour display will begin flashing, press lock but-
ton to select between hour or minute setting, Press
the Unlock button to advance hour and minutes.
Press and hold Lock and Unlock buttons for 2 sec-
onds to save time.
Time setting: 24 hour setting
RANGE INDICATION
The LCD display has an antenna icon that has 3
bars, to indicate the transmitter is in-range of the
motorcycle. If the transmitter is not in-range of the
motorcycle the bars will disappear.
BUILT-IN SHOCK SENSOR ADJUSTMENT
The system's built-in shock sensor has 8 levels of
5