Subscribe to Our Youtube Channel
Related Manuals for Max Pro MOHI JL-1002
Summary of Contents for Max Pro MOHI JL-1002
- Page 2 Safety is important! Your safety and the safety of others is important. Please, therefore, ensure you read the safety instructions before you operate this hot air styler Kind regards, Team Max Pro...
- Page 3 Read all the safety instructions before first use of your hot air styler WARNING: THIS HOT AIR STYLER UNTIL THE POWER IS DISCONNECTED AT THE MAINS. TO AVOID RISK OF ELECTRIC SHOCK: 220-240V~ 5 Do not use this device in a bathtub, shower, or water-filled reservoir 1] WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
- Page 4 current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice. 6] The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabili- ties, or lack of experience and knowledge, unless they have been given supervision or instruction.
- Page 5 has been disconnected. 12] This hot air styler should never be left unattended when plugged in. 13] Do not pull or wrap power cord around the hot air styler. 14] Close supervision is necessary when this appliance is used by, on , or near children. 15] Do not use attachments not recommended by the manufacturer.
- Page 6 19] Do not use outdoors, or where aerosol products are being used. 20] Do not direct hot air toward eyes. 21] Attachments may get hot in use. Use care when handling them. 22] Do not put the hot air styler down while it is operating. 23] Check that the voltage rating of this appliance matches that of your supply.
- Page 7 IMPORTANT The mains lead of this appliance is not replaceable by the user. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Safety considerations: Position the power supply lead so that it is not likely to be walked on or pinched by things placed on or against them.
- Page 8 1] 0-I-II Switch 2] I-II-Ⅲ Switch 3] Handle 4] Power cord 5] Release button 6] Round roll brush 7] Pad air brush 8] Concentrator 9] Big roll brush...
- Page 9 ASSEMBLY | Clip the concentrator onto the front of the hairdryer (if required). SWITCHING ON | Mains power * Unwind the power cable and plug into the mains socket and switch on * Set the On/ Off switch to the required settings (1 or 2) * Position 2 is more heater than position 1.
- Page 10 as you style. 4] For quick styling, dampen hair with a mist of water before styling with the dryer. 5] When using the dryer to create curls and waves, dry hair almost completely on the warmest setting, then finish styling using the lower setting.
- Page 11 If the hairdryer still does not work properly, please send an e-mail to info@maxprohair.com. DISPOSAL This marking indicates that this product should not be dis- posed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
- Page 12 www.maxprohair.com info@maxprohair.com +31 (0)20 261 0907...
Need help?
Do you have a question about the MOHI JL-1002 and is the answer not in the manual?
Questions and answers