Advertisement
Fisual DAC-2000 Digital To Analogue Converter
Thank you for purchasing the DAC-2000 converter, before use we recommend you read the
following instructions and retain them for future reference. The DAC-2000 is designed to convert
a digital audio signal of either optical or coaxial type into a stereo analogue output suitable for use
with standard analogue amplifiers or any other device with a line level analogue input.
Features
● Switchable input selector
● Supports PCM stereo audio signals up to 96kHz
● Compact size for easy installation
What's in the box
● DAC-2000 switch unit
● Power supply
● Phono (RCA) cable
Usage
Prior to installation we recommend powering off all devices to be connected and turning them
back on once all connections have been made.
1. Identify which digital output the device you wish to connect has (optical / coaxial).
Advertisement
Table of Contents
Summary of Contents for Fisual DAC-2000
- Page 1 Fisual DAC-2000 Digital To Analogue Converter Thank you for purchasing the DAC-2000 converter, before use we recommend you read the following instructions and retain them for future reference. The DAC-2000 is designed to convert a digital audio signal of either optical or coaxial type into a stereo analogue output suitable for use with standard analogue amplifiers or any other device with a line level analogue input.
- Page 2 DAC-2000. 3. Toggle the switch on the side of the unit to select the input being used. 4. Use the supplied phono cable to connect the output side of the DAC-2000 to your amplifier. 5. Connect the DC connector from the supplied power supply to the DAC-2000.
- Page 3 Troubleshooting No power LED ● Ensure firm connection of DC plug to the DAC-2000. ● Check that the power supply is plugged in and the mains outlet is turned on. No audio output ● Check that the power LED is lit.
Need help?
Do you have a question about the DAC-2000 and is the answer not in the manual?
Questions and answers