Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for VStarcam WPG244
- Page 1 WIFI+GSM+PSTN Home Alarm System...
-
Page 2: Table Of Contents
Contents 1. Preface --------------------------------------------------------------------------------------- 2. Main Features and Technical Information --------------------------------------------- 3. Top View ------------------------------------------------------------------------------------- 4. Back Panel Cable Connection View ---------------------------------------------------- 5. Initialization ---------------------------------------------------------------------------------- 6. Daily Operation ----------------------------------------------------------------------------- 6.1 System Arm ----------------------------------------------------------------------------- 6.2 System Disarm -------------------------------------------------------------------------- 6.3 System Stay Arm ----------------------------------------------------------------------- 6.4 SOS --------------------------------------------------------------------------------------- 7. -
Page 3: Preface
Preface Thanks for choosing our WiFi + GSM + PSTN home alarm system. This system has implanted the most advanced and popular WiFi technology into traditional GSM +PSTN alarm system technology, which with simple wireless set up and easy-read LED display. It’s very convenient for users to set up the alarm system via App. -
Page 4: Main Features And Technical Information
Main Features ● WiFi+ GSM +PSTN home alarm system with LCD display ● 99 wireless zones + 4 wired zones ● 4 groups alarm phone call No. +3 groups SMS phone No. ● Android + IOS APP application easy to control ●... -
Page 5: Top View
Front Panel View ► Power: Power light is on and screen show AC adaptor → alarm panel is turned on and power supply powered. Power light is on and screen show Battery → alarm panel is turned on and battery powered. - Page 6 Alarming: ► Alarm light is on and screen shows “Zone Number + Alarm”, for example 88 Alarm → 88 Zone is alarming. Alarm light is off → No alarm occurs ► WIFI Signal: WIFI light flash → alarm panel WIFI has not initiated yet; WIFI light is on →...
-
Page 7: Back Panel Cable Connection View
Back Panel Cable Connection Diagram Initialization Insert SIM Card, connect power supply, and then switch on the alarm panel, panel will voice prompt "Welcome to use alarm system", and start searching GSM network. GSM signal ， “GSM signal” Flashing Means searching GSM signal SIM card and “GSM signal”On Means GSM signal normal... -
Page 8: Daily Operation
Daily Operation System Arm It means to guard all around your house while everyone is going out, all detectors of the panel are under working. When detectors were triggered by detecting source (anti-theft, fire prevention, gas leak, etc.) The alarm panel will sound alarm. There are four methods to arm: System Disarm It means to stop the alarm when the panel sounds or make the alarm system in the... -
Page 9: Sos
In emergency, press the SOS button on the remote controller, the system panel will start alarm and call the preset phone numbers automatically for help. There are two methods to start SOS emergency. Notes: If alarm panel keypad lock enabled, user need enter password before any other operations. -
Page 10: Wifi App Operation
Delete Remote Control: 1. Press "# "Key to enter setting status; 2. Press command “08+(01~99)+# ” to delete the remote controls which added in zone 1~zone 99； Press command “08+**+#”to delete all the remote controls which added to the panel. 3. -
Page 11: Connect Wifi For Alarm Panel
Connect WiFi for Alarm Panel: 1. Press 【#】on the alarm panel keypad to enter system setting status. 2. Press 29# to enter Wifi Setting. 3. Alarm panel screen will show 60 seconds countdown, at this time input wifi account and password in APP. Then alarm panel voice prompt “setting successful”and Wifi indicator light keep on. -
Page 12: System Status Setting
System Status Setting: 1. Click the device to enter main interface to set Arm, Disarm and Stay Arm. Zone Setting: 1. Modify Zone Name: Steps: Click “Device Setting” Click “Zone Setting” Choose the zone which → → user wants to Modify Click “Modify Name”... -
Page 13: Setting Zone Type
2. Setting Zone Type : Step: Click “Zone Type” , then user can choose the zone types by himself. 3. Add/Delete Accessories: Steps: Click “Accessories”, each zone can add 4 detectors → Press one of the button between 1-4, → alarm host will make “Beep” “Beep” voice, it means the alarm host is under setting status →... -
Page 14: Turn On/Off Siren
4.Turn ON/OFF Siren Steps: Click “Siren” to ON/OFF the siren sound for this zone. Grey color means turn off. Add/Delete Alarm Phone No. and SMS Phone No Add/Delete Alarm Phone No. Steps: Click “Alarm Phone No.” and then input Phone No. click “Apply” Button to Save the setting. -
Page 15: System Time Setting
System Time Setting: Click “Time Setting”, then user can set system time there. Timing Setting: Click “Timing Setting”, then user can set Alarm Delay Setting, Arm Delay Setting etc. There also have two groups Timing Arm and Disarm by week. - 13 -... -
Page 16: Other Operations
Other Operations: 1. Switch Settings: User can turn ON/OFF all the switches in via this function. 2. Siren Setting : User can set Siren ON/OFF and Alarm Time. 3. Modify Device Password: User can reset passed of the device. Check push messages: Click Messages at the bottom of the right corner, then can check all the push messages. -
Page 17: Gsm Operation
GSM Operation: Answer Alarm Call When alarm occurs, alarm panel will dial the pre-set number, If telephone-line and GSM network both normal, alarm panel will prior to choose telephone network to dial preset phone number from Group 1-9 meanwhile sent SMS to preset SMS phone number. If the user‘s phone is busy or can not be connected, the alarm system will transfer to dial the next preset phone number till three cycles. -
Page 18: Setting Command Via Keypad,Mobile Phone Call And Sms
Setting Command Via Keypad,Mobile Phone Call and SMS Except WiFi App can set alarm system parameter, user also can through alarm panel touch keypad, phone call and SMS to set. Command format are as below: 1. Touch keypad: Press press to exit setting [#]+[ Command] to do setting, and then Phone call: Call the SIM card number of the alarm system, input [Command] to do setting. - Page 19 E.g. : User need turn on voice prompt when setting the system 1. Press [#] on the keypad and then press [110#] Command： 2. Remote calling the alarm panel, input [password]+[#] to enter [11]+[0/1]+[#] setting status, then press [110#] 3. Send SMS message [1234110#] Telephone Line Break [0/1]: 0 means OFF, 1 means ON.
- Page 20 1. Press [#] on the keypad and the press[508888#] Command: 2.Remote calling the panel, input [password]+[#] to enter setting [50]+[4 digits new status, input [508888#] passwords.] + [#] 3. Send SMS message [1234508888 # ] Delay Arming Time The alarm host will enter the arming status after a certain time if Setting arming by remote or host.
- Page 21 This panel can set 4 groups timing arm. Timing Arm Setting Command： E.g.: Set the first group timing arm at 22:00, timing disarm at [57]+ [01~04 group 07:00, from Monday to Friday are effectively. number]+[AAAA Arm 1. Press [#] on the keypad and then press [57012200070012345#] Time]+[BBBB Disarm 2.
- Page 22 [0/1]: 0 means OFF,1 means ON Door Sensor Two-way ON/OFF E.g. : Set door sensor two-way Alarm function ON 1. Press [#] on the keypad and then press [631#] Command： 2. Remote calling the alarm panel, input [password]+[#] to enter [63]+[0/1]+[#] setting status, then press [631#] 3.
-
Page 23: Sms Query Command And Setting
after five seconds, release “SOS” key After this operation, the panel is totally reset, all settings, remote controls and detectors are deleted. Password turns to default 1234. SMS Query Command and Setting The following instructions are only for SMS command to control panel remotely: Disarm Send SMS 12340# into alarm panel Note: 1234 is the password, If client changed password, then... - Page 24 Use for query 4 groups timing arm/disarm status. Query Timing Send SMS 123457#, then alarm panel reply Arm/Disarm status 2004-02-05 12:30 First Group Arm: 12:00 Disarm: 13:00 Week:1234567 Second Group Arm: 12:00 Disarm: 13:00 Week:1234 57+[#] Third Group Arm: 12:00 Disarm: 13:00 Week: 234 Fourth Group...
-
Page 25: System Factory Default
System Factory Default Operation Password 1234 Remote Setting Enable Alarm Relay Out Put Enable Telephone line break Telephone call control 8 times alarm ON/OFF Ringing times Beep Duration Time of Siren Tone ON/OFF 1min Enable Siren when Arm / Disarm Delay Arming Time 0 second Delay Alarming Time... - Page 26 The Installation Diagram of PIR Motion Detector: To avoid the false alarm, please pay attention to the following point in stalling the PIR motion detector; A: Do not face the glass window. B: Do not face the big object which is easy to swing. C: Do not face the cold and heat air vent or cold and heat source.
- Page 27 Maintenance System Inspection: The System need periodic inspection to ensure the stable and safe work. We suggest the users to inspect the system per three month and inspect the detectors per month. Alarm Host Inspection: A：Check whether the host can arm or disarm normally. B：Check whether the host can call through the phone numbers when alarm occurs.
Need help?
Do you have a question about the WPG244 and is the answer not in the manual?
Questions and answers