Advertisement
Table of Contents
EverSewn Loft - 2
Set-Up INSTRUCTIONS
Before you get started:
•
Two people are necessary for assembly.
•
Call 1-844-EVERSEW (1-844-383-7739) or info@eversewn.com for information or assistance.
•
Your Loft consists of 5 large boxes and 1 small box.
•
Organize hardware into piles.
Tools needed:
Disclaimer: For home use only. Brewer Sewing Supplies is not responsible for injuries associated with the Loft system and assembly.
LOFT
+ -
version 4
Advertisement
Table of Contents
Summary of Contents for EverSewn Loft-2
- Page 1 SET-UP INSTRUCTIONS Before you get started: • Two people are necessary for assembly. • Call 1-844-EVERSEW (1-844-383-7739) or info@eversewn.com for information or assistance. • Your Loft consists of 5 large boxes and 1 small box. • Organize hardware into piles.
- Page 2 Included Parts LOFT Side board (2x) Fixed board (1x) Moveable board (1x) Back panel (1x) Machine Cover (1x) Spacer (1x) Leg (1x) Drawers (1x) Table Top (1x) (G2) (B1) Long Cam Pin Cam Pin (16x) Adhesive Cam Silver Screw Gold Screw Dowel (8x) (4x) Cover (20x)
- Page 3 Set-Up LOFT Screw in balance legs (F) to underside of drawers (9). Attach Cam Pins (B) and Steel Columns (D) to Drawers and Leg (8). Note: Do not tighten Place Back Panel (4) into Drawers and Leg. back panel to drawers until step 6 Tighten left side cam locks (C) only.
- Page 4 Set-Up LOFT (K1/K2) Line up the holes and place spacer (7) on top of leg. Insert big gold screws (G2) through underside of leg (8) and tape into place until table top is attached. Depending on size of machine screw K1 or K2 screws into tee nuts (P).
Need help?
Do you have a question about the Loft-2 and is the answer not in the manual?
Questions and answers