Glasdon Automate FIREXPIRE Re-Assembly Instructions

FIREXPIRE
DO NOT DESTROY - IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE
FIREXPIRE IS AN EFFECTIVE LOW COST AUXILIARY DEVICE AND MUST NEVER REPLACE PRIMARY FIRE
PREVENTION MEASURES. OBSTRUCTIONS PREVENTING THE PLATE FROM DROPPING MAY ADVERSELY
AFFECT THE FUNCTION OF THE UNIT AND AS MANY FIREXPIRE DEVICES ARE USED IN UNSUPERVISED
LOCATIONS, REGULAR INSPECTION AND IMMEDIATE REPLACEMENT OF ANY DAMAGED OR DISTORTED

HOW IT WORKS

The Firexpire system includes four important
components.
1. Central Spacer
2. Firexpire Extinguishing Plate
3. Thermoplastic Trigger Washer
4. Panhead Screw
Firexpire works by having a plate suspended
above aperture height secured by a
Panhead Screw and a Thermoplastic Trigger
Washer.
When a fire occurs inside the liner, the
Thermoplastic Washer responds by releasing
the Firexpire Plate.
This then drops onto the liner sealing and
starving the fire of oxygen, thus snuffing out
the fire.

HOW TO REPLACE THE PLATE FOLLOWING A FIRE

REQUIRED
• Replacement Thermoplastic Trigger Washer
• Screw Driver
1.
After first ensuring the Firexpire Plate is cool
and the contents of the Liner compartment
have been extinguished, remove the top
section of the litter bin and turn the Hood
upside down.
2.
Using a screwdriver, unscrew the Panhead
Screw and Thermoplastic Trigger Washer
(which will now be deformed) from the
Central Spacer. Remove and discard the
deformed Thermoplastic Trigger Washer
from the Panhead Screw.
Automate
RE-ASSEMBLY INSTRUCTIONS
™
COMPONENTS IS ESSENTIAL.
1.
™
Extinguishing Plate
Panhead Screw
Thermoplastic Trigger Washer
Central Spacer