Backlighting - Home Theater Master SL-9000 Operating Manual

Using Y
Using Y
No IR commands are emitted during the second press of a
Device button when the remote is in the Automatic Audio
mode. Pressing the Device button again will return the
remote to the Main Device Mode.
To Delete the Automatic Audio for a Device mode:
1
Press and hold the AUDIO Device button and the LIGHT
button simultaneously. A_SET will appear in the LCD.
2
Press the Device button corresponding to the Device mode
to be deleted for Automatic Audio. E.g. VCR, CD etc.
A_OFF will appear in the LCD indicating the deleted
status of the automatic Audio mode for the Device mode.
3
Press the ENTER button to store the programming.
SAVE will flash in the LCD and then return to AUDIO.
To Return to Automatic Audio for a Device mode:
1
Press and hold the AUDIO Device button and the LIGHT
button simultaneously. A_SET will appear in the LCD.
2
Press the Device button corresponding to the Device mode
to be added for Automatic Audio. E.g. VCR, CD etc.
A_ON will appear in the LCD indicating the active
status of the Automatic Audio mode for the Device mode.
3
Press ENTER to store the programming. SAVE will flash
in the LCD and then return to AUDIO.

Backlighting

All the buttons and the LCD on the
for 7 seconds when the LIGHT button is pressed. The back-
light is extended an additional 7 seconds with any button
press while the backlight is on.
our Remote
our Remote
SL-9000 are back-lit
22
22