Summary of Contents for Hathor Energy HATHOR-16TM
- Page 1 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM info@hathorenergy.com www.hathorenergy.com...
- Page 2 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM HATHOR-16TM HATHOR-16TM Daily-Weekly Timer combines the following functions: •Voltage relay •Photo relay •Real time relay And is designed for: •Load energizing/de-energizing in accordance with the user-set make/break time •De-energizing load in case of inadmissible voltage variations in the mains...
- Page 3 An external photosensitive diode connection is also possible. The HATHOR-16TM relay output terminals can immediately switch wattage load of up to 3.5 kW (16A). When it is necessary to switch greater wattage, a magnetic starter should be utilized.
- Page 4 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM •Setting the time of load cutoff tripping based on the upper voltage threshold •Setting the time of load cutoff tripping based on the lower voltage threshold •Setting the time of load cutoff tripping after the mains parameters recovery •Setting the illumination threshold...
- Page 5 - Light-sensitive photo relay - Voltage indicator The HATHOR-16TM is designed for: - Turning ON/OFF the power load (equipment) according to the time schedule preset by the user; - Turn OFF home used or industrial single phase (240V / 50Hz) power load (equipment) in case the unallowable voltage fluctuations are detected.
- Page 6 2 different settings for curtain cases. Output terminals of the HATHOR-16TM may commutate the power load up to 3,5 kW (16A). If total power load connected to the HATHOR-16TM is more than 3,5 kW (16A) then it will be necessary to commutate the required power load with a use of appropriate contactor (magnetic starter).
- Page 7 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM SERVICE MANUAL 1 – green LED indicates the “ON” state of relay; 2 – green/red LED signal indicates the input voltage presence; 3 – light sensor (photodiode); 4 – menu control buttons: –...
- Page 8 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM SERVICE MANUAL 2 TECHNICAL PARAMETERS info@hathorenergy.com www.hathorenergy.com...
-
Page 9: General Description
LED light “ON” in the left upper corner of the front panel (Figure 1; point – 1). Current operation mode of the HATHOR-16TM is marked by green LEDs “F”, “U”, “H” on the front panel (Figure 1; point – 7). - Page 10 HATHOR-16TM SERVICE MANUAL BASIC SETTINGS: - to set the operation mode (“F”, “U”, “H”) of the HATHOR-16TM; - to set the operation mode and curtain user required set of parameters (there are 2 independent sets of parameters (programs) that the user may keep in the device memory);...
- Page 11 Output contacts of the relay will be kept in a cold initial state. For example HATHOR-16TM was preprogrammed such a way that every day of a week it turn ON the power load at 22:00 and then at 8:00 in the morning of next day it turns the power load OFF.
- Page 12 HATHOR-16TM SERVICE MANUAL As soon as the power load restore and return back to normal values HATHOR-16TM will turn ON the power load again but according to the preprogrammed schedule of operation. So at 6:00 when the power return –...
- Page 13 B – equal time-schedule for working days (Monday-Friday); C – equal time-schedule events for weekend days (Saturday-Sunday); To give the power supply to the HATHOR-16TM it’s necessary to connect mains voltage wires to 1-1 and 2-2 input contact terminals. ATTENTION! All connections of terminals should be performed strictly according to safety regulations and in the absence of voltage in the mains.
- Page 14 Notes: To set the time it’s necessary to input all digits including “0”. For example 7:35 morning time should be set as 07:35. After setting the schedule of events for HATHOR-16TM it’s necessary to connect the power load to the output contacts of HATHOR-16TM.
- Page 15 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM SERVICE MANUAL info@hathorenergy.com www.hathorenergy.com...
- Page 16 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM SERVICE MANUAL info@hathorenergy.com www.hathorenergy.com...
- Page 17 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM SERVICE MANUAL info@hathorenergy.com www.hathorenergy.com...
- Page 18 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM SERVICE MANUAL info@hathorenergy.com www.hathorenergy.com...
- Page 19 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM SERVICE MANUAL info@hathorenergy.com www.hathorenergy.com...
- Page 20 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM SERVICE MANUAL info@hathorenergy.com www.hathorenergy.com...
- Page 21 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM SERVICE MANUAL info@hathorenergy.com www.hathorenergy.com...
- Page 22 (those that are valid and the deleted (not active events) settings also). To set the time schedule for the HATHOR-16TM it’s recommended to prepare first such a table and then to preprogamm the device. info@hathorenergy.com...
- Page 23 HATHOR DAILY WEEKLY TIMER WITH PHOTO SENSOR HATHOR-16TM SERVICE MANUAL 5 WIRING DIAGRAMMS VARIANT A IF THE POWER LOAD IS LESS THEN 16A (3.5 KW) THE RELAY MAY OPERATE WITH THE LOAD DIRECTLY VARIANT B IF THE POWER LOAD IS MORE THEN 16A (3.5 KW). THE RELAY MUST...
-
Page 24: Storage And Shipping Conditions
–45 to +75 ºC and exposed to no more than 80% of relative humidity when there are no fumes in the air that exert a deleterious effect on package and the HATHOR-16TM material. The Buyer must provide the protection of the timer against mechanical damages in transit. - Page 25 info@hathorenergy.com www.hathorenergy.com...
Need help?
Do you have a question about the HATHOR-16TM and is the answer not in the manual?
Questions and answers