Summary of Contents for Middle Atlantic Products FlexView FVS Series
Page 1
Instruction Sheet FlexView ™ FVS Series Electric Lift THANK YOU Thank you for purchasing the FlexView™ FVS Series Electric Lift. Please read these instructions thoroughly before installing this product. PRODUCT FEATURES • Middle Atlantic PD-815SC (8) outlet, 15 amp power strip with surge and circuit breaker •...
IMPORTANT SAFETY INSTRUCTIONS CAUTION! To avoid an unstable condition, place heavier WARNING/CAUTION! The exclamation point within an components at the bottom of the cabinet. When more than equilateral triangle is intended to alert the user to the one component is placed in the cabinet, begin at the presence of important operating and maintenance bottom of the cabinet and place equipment at the lowest (servicing) instructions in the literature accompanying the...
WEIGHT RATINGS ITEM DETAILS 175 lbs. (79.4 kg) Maximum Screen 190 lbs. (86.2 kg) Maximum Screen (Including Camera Mount and Soundbar Mount) 50 lbs. (23 kg) Maximum Internal 240 lbs. (109 kg) Maximum Total Rated Load TOOLS REQUIRED • #2 Phillips Screwdriver •...
HARDWARE/ITEMS SUPPLIED NOTE: Additional hardware is included FLAT PANEL MOUNTING HARDWARE that may not be required for your installation. M4 x 16 (Qty 8) (Qty 4) M4 x 25 M5 x 12 (Qty 8) 5/16” Flat Washers (Qty 10) M5 x 16 (Qty 6) M5 x 20 (Qty 6)
FLAT PANEL INSTALLATION NOTE: It is reccomended to position the Recommended Screen Size display so that it is centered with the Viewing Distance Display Height (Diagonal eyeline of the viewer. The following chart Range Range to 1080P) is provided to assist you with determining Display Center the proper height of your display.
VESA 800 EXTENSION BRACKET INSTALLATION (IF REQUIRED) 1) For monitors that require VESA 800 spacing, the VESA 800 monitor adapter bracket must be used (not required for VESA 600 or less spacing). 2) Place vertical monitor mounting brackets over VESA 800 adapter bracket studs and secure using (4) 5/16”...
FLAT PANEL INSTALLATION (CONTINUED) Attaching Vertical Mounting Brackets to Flat Panel NOTE: The brackets are indicated (L) Left and (R) Right. Mounting 1) Place the flat panel face down on a soft, flat surface and Screw Vertical identify the number and location of screws. Mounting Bracket Universal...
FLAT PANEL INSTALLATION (CONTINUED) 4) Slide flat panel sideways until vertical mounting brackets drop into notches in horizontal mounting bracket. (FIGURE H) NOTE: Several notch locations are provided for horizontal position adjustment. Notches FIGURE H 5) Raise monitor to highest position. Screws (2) 10-32 x 3/4”...
DOOR REVERSAL PROCEDURE 1) Lift and twist door hinges to remove desired door. (FIGURE J) FIGURE J 2) On lower door only, remove and reinstall hinge on opposite side. (FIGURE K) 3) Re-attach doors using holes provided. FIGURE K Page 10...
LEVER LOCK™ TOOL FREE INTERNAL MANAGEMENT SYSTEM The FlexView comes equipped with the following Lever Lock™ items: (6) LL receptacle brackets, (2) LL-HC21 horizontal channels, and (1) LL-VP1710 vertical 10” deep plate. Use Receptacle Brackets To Lace Use Vertical Cable Bundles Plate To Mount From Top To Bottom Small Devices...
FIGURE O WARRANTY Middle Atlantic Products (the "Company") warrants the FlexView™ FVS Series Electric Lift for a period of (7) seven years from date of shipment by the Company. The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty...