Related Manuals for Merrithew Stability Barre
Summary of Contents for Merrithew Stability Barre
- Page 1 OWNER’S MANUAL Stability Barre ™ Please review this important assembly, safety and warranty information about your new Merrithew equipment and keep it handy for future reference. ™...
-
Page 2: Care And Cleaning
Do not hang from the barre or use it to pull yourself up. support during ballet and standing exercises. It is not The Stability Barre should not be used by persons weighing intended to carry full body weight. Do not lean against, over 350 lbs / 159 kgs. - Page 3 White or Gray finish 4 Pre-Drilled Holes 9 Rubber Feet 6', 8' and 12' lengths 5 Plastic Sleeve 10 Metal Plate For 8' Wall-Mounted Stability Barre See page 8 Stability Barre Connectors FOR PARALLEL BARRES ONLY 11 Clamp 12 Connector...
- Page 4 ASSEMBLY INSTRUCTIONS Assembling the 6' and 8' Stability Barres STOP! Read these instructions completely before beginning or refer to our online assembly video at: merrithew.com/eq-assembly 1. Attach the telescopic support (upright) [7] to the 2. Insert guide tube [2] into telescopic support (upright) [7].
- Page 5 STOP! Read these instructions completely before beginning or refer to our online assembly video at: merrithew.com/eq-assembly 1. Repeat steps 1 and 2 from the Stability Barre Assembly (page 4) for all three uprights. 2. Insert one 6' wooden barre [1] into the first guide tube [2] allowing a minimum 3"/ 7.5 cm overhang.
-
Page 6: Assembly And Setup
STOP! Read these instructions completely before beginning. 1. Assemble two Stability Barres as described in the 4. Attach the other end of the connector to the second Stability Barre Assembly [Page 4]. Stability Barre at the same height. 2. Use connectors [12] to join two Stability Barres. - Page 7 ONE AT EACH END. Leveling the Base Adjustment The weighted base plate [8] comes with adjustable Rubber Feet [9] to accommodate most flooring. Loosen (unscrew) or tighten (screw) Rubber Feet [8] as required to assist in the leveling of your Stability Barre.
-
Page 8: Part Identification
PLEASE DO NOT ATTEMPT TO ASSEMBLE ON YOUR OWN. We highly recommend that you have this product installed by a professional contractor. Read instructions completely before beginning assembly. Improper installation voids equipment warranty. Merrithew will not be responsible for any injury or damage resulting from improper installation. -
Page 9: Maintenance & Replacement Parts
MAINTENANCE & REPLACEMENT PARTS Replacement Parts For more information and to place an order, visit merrithew.com/replacementparts or email equipment@merrithew.com Pop-up Pin 3-Prong Knob Stability Barre Connectors Use to adjust telescopic Secures or unlocks the Configure individual Stability Barres into Parallel Stability Barres. -
Page 10: The Fine Print
Limited Lifetime Warranty limited warranty. Merrithew will, at its option, repair or replace any of the parts listed below, Neither distributors, dealers, web resellers, nor the retailers selling this provided that the part(s) fail due to a defect in workmanship ... - Page 11 Halo Training. Join our global community ™ ® ™ ® of elite fitness professionals. Merrithew courses and workshops are offered worldwide. Find courses and workshops near you at merrithew.com/education/training Contact Us 416.482.4050 | 1.800.910.0001 | 0800.328.5676 UK | ext. 300...
- Page 12 IMPORTANT Please keep this manual in a safe place. 2200 Yonge Street, Suite 500, Toronto, Ontario, Canada M4S 2C6 416.482.4050 | 1.800.910.0001 | 0800.328.5676 UK | ext. 0907 customercare@merrithew.com | merrithew.com...
Need help?
Do you have a question about the Stability Barre and is the answer not in the manual?
Questions and answers