Advertisement
Advertisement
Table of Contents
Summary of Contents for Digitech Audio Visual AR1903
- Page 1 HDMI Over Mains Power with IR User Manual...
-
Page 2: Important Safety Notice
Thank you for purchasing this product. For optimum performance and safety, please read the instructions carefully and keep the manual for future reference. IMPORTANT SAFETY NOTICE Please read below safety instructions carefully before installation and operation: 1. Please pay attention to all the warnings and hints on this device. 2. -
Page 3: Package Contents
PACKAGE CONTENTS 1 x HDMI Extender TX 1 x HDMI Extender RX 1 x AC 100-240V Sender Receiver Powerline 1 x IR Blaster 1 x IR Receiver Extension 1 x User Manual Extension Cable Cable PANEL DESCRIPTION 1. HDMI Extender TX Sender Data Transmission LED Blinks slowly when it is connecting. - Page 4 2. HDMI Extender RX Receiver Data Transmission LED Blinks slowly when it is connecting. LED blinks fast when it is successfully connected and transmitting data. Connection LED LED blinks to indicate a working circuit connection. Reset Press reset button to restart the device. Power Input Connect with AC100~240V power line.
-
Page 5: Specifications
Q: TV display “waiting for connection…” on the bottom right corner? A: Please check if the power supply of TX (sender) is well connected and thepower indicator led lights on. Q: TV display “Please check the TX input signal”? 1) Please check if there is an HDMI signal input of sender TX. 2) Try to connect the signal source directly to display device to see if there is signal output from source device or change the signal source, HDMI cables and try again.
Need help?
Do you have a question about the AR1903 and is the answer not in the manual?
Questions and answers