SAFETY INSTRUCTIONS Safety Instructions For your safety,the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life. Explanation of the symbols: ! Warning! This combination of symbol and signal word indicates a potentially dangerous situation which may result...
Page 4
SAFETY INSTRUCTIONS • The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused. • Before any maintenance the device, unplug the appliance from the mains. • Always unplug the machine and turn off the water supply after use.
Page 5
SAFETY INSTRUCTIONS • Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result. • Plug must be accessible after installation. Risk of explosion! Do not wash or dry articles that have been cleaned in, • washed in, soaked in, or dabbed with combustible or explosive substances( such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) This...
Page 6
SAFETY INSTRUCTIONS • Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result. Risk of damaging appliance! Your product is only for home use and is only designed for • the textiles suitable for machine washing. •...
Page 7
SAFETY INSTRUCTIONS • Make sure that all pockets are emptied. Sharp and rigid items such as coin,brooch,nail,screw or stone etc. may cause serious damages to this machine. • Please check whether the water inside the drum has been drained before opening its door.Please do not open the door if there is any water visible.
INSTALLATION Product Description Power supply cord Door Detergent dispenser Drum Control panel Drain hose Service filter Note! • The product line chart is for reference only, please refer to real product as standard. Accessories Transport Drain hose support Owner’s manual Supply hose hole plug...
Page 9
INSTALLATION Installation Installation area ! Warning! • Stability is important to prevent the product from wandering! • Make sure that the product should not stand on the power cord. W> 20mm Before installing the machine, the location characterized follows shall be selected: 1.Rigid, dry, and level surface 2.Avoid direct sunlight 3.Sufficient ventilation...
Page 10
INSTALLATION Levelling the washing machine ! Warning! • The lock nuts on all four feet must be screwed tightly against the housing. Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions tighten the nuts. 2.Loosen the lock nut turn the feet until it closely contacts with the floor.
Page 11
INSTALLATION Connect the other end of inlet pipe to the inlet valve at the backside of product and fasten the pipe tightly clockwise. water supply hose water Inlet valve Drain Hose ! ! Warning! Warning! • Do not kink or protract the drain hose. •...
OPERATIONS Quick Start Caution! • Before washing, please make sure it’s installed properly. • Before washing at first time, the washing machine shall be operated in one round of the whole procedures without clothes in as follows. 1. Before Washing Prewash Softener Main wash...
OPERATIONS Before Each Washing • The w orking condition of the washer should be(0-4 0) ℃. If used under 0 ℃ ,the inlet valve and draining system may be damaged. If t he machine is placed under condition of 0 ℃o r l ess, then it should be transferred to normal ambient temperature to ensure t he w ater s upply h ose a nd d rain hose a re n ot f rozen before use.
OPERATIONS Detergent Dispenser Pre wash detergent Main wash detergent Prewash SoftenerMain wash Softener Pull out the dispenser Caution! • Detergent only need to be added in "case I “after selecting pre-washing for machines with this function. Programme Programme Cotton Spin Only Synthetic Rinse &...
OPERATIONS Control Panel Model:WTL-80132 Note! • The chart is for reference only, Please refer to real product as standard. On/Off Start/Pause Press the button to start or pause the Product is switched On/Off. washing cycle. Programmes Option Available according to the laundry type.
Page 16
OPERATIONS Control Panel Model:WTL-75122 Note! • The chart is for reference only, Please refer to real product as standard. On/Off Start/Pause Press the button to start or pause the Product is switched On/Off. washing cycle. Programmes Option Available according to the laundry type. This allows you to select an additional function and will light when selected.
Page 17
Caution! • If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and when the power is restarted the program will continue. Model:WTL-75122 / WTL-80132 Programme Option Programme Option...
Temp. Press the button to regulate the temperature(Cold,20 ℃, 40℃,60℃,90℃) Spin Spin Press the button to change the speed. 1200: 0-600-800-1000-1200 1300: 0-600-800-1000-1300 Model:WTL-75122 / WTL-80132 Programme Programme Default Speed(rpm) Default Speed(rpm) 1200 1300 1200 1300 Cotton Spin Only...
Page 19
OPERATIONS Child Lock To avoid mis operation by children. Spin Delay Choose the Programme Start Press [ Spin ] and [ Delay 3 sec. till buzzer beep. Caution! • During the “Child Lock”function is activing, the buzzer will beep 3 times, When the buttons are pressed.
OPERATIONS Programmes Programmes are available according to the laundry type. Programmes Hard-wearing textiles, heat-resistant textiles made of cotton or Cotton linen. Wash synthetic articles, for example: shirts, coats, blending. Synthetic While washing the knitting textiles, detergent quantity shall be reduced due to its loose string construction and easily forming bubbles.
MAINTENANCES Cleaning And Care ! Warning! • Before your maintenance starts, please unplug the machine and close the tap. Cleaning The Cabinet Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary.
Page 24
MAINTENANCES Cleaning The Inlet Filter Note! • Inlet filter must be cleaned if there is less water. Washing the filter in the tap 1.Close the tap. 2.Remove the water supply hose from the tap. 3.clean the filter. 4.Reconnect the water supply hose Washing the filter in washing machine: Screw off the inlet pipe from the backside of the machine.
Page 25
MAINTENANCES Cleaning The Drain Pump Filter ! Warning! • Be careful of the hot water! • Allow detergent solution to cool down. • Unplug the machine to avoid electrical shock before washing. • Drain pump filter can filter the yarns and small foreign matters from the washing.
MAINTENANCES Trouble Shooting The start of the appliance does not work or it stops during operation. First try to find a solution to the problem, If not, contact the service centre. Description Reason Solution Washing machine Restart after the door is closed Door is not closed properly cannot start up Check if the clothes is stuck...
MAINTENANCES Technical Specifications Power Supply 220-240V~,50Hz MAX.Current Standard Water Pressure 0.1MPa~1MPa Rated Power Dimension Net Weight Washing Model (W*D*Hmm) Capacity WTL-75122 7.5kg 400*610*875 56kg 2100W WTL-80132 8.0kg 400*610*875 56kg 2000W...
MAINTENANCES Product Fiches WTL-75122 Model Capacity 7.5kg Spin Speed 1200 rpm Energy efficiency class A +++ ❶ Annual energy consumption 185 kWh /annual ❷ 0.5W Power consumption of off - mode 1.0W Power consumption of Left on -mode Annual water consumption 11000L /annual ❸...
Page 29
MAINTENANCES Product Fiches WTL-80132 Model Capacity 8.0kg Spin Speed 1300 rpm Energy efficiency class A +++-30% ❶ Annual energy consumption 137 kWh /annual ❷ 0.5W Power consumption of off - mode 1.0W Power consumption of Left on -mode Annual water consumption 11000L /annual ❸...
Page 30
MAINTENANCES Note! • Programme setting for testing in accordance with applicable standard En60456. • When using the test programmes, wash the specified load using the maximum spin speed. • The actual parameters will depend on how the applicance is used,and maybe different with the parameters in above mentioned table.
Page 31
NOTICE ABOUT RECYCLING Your product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/ recycling centre.
Need help?
Do you have a question about the WTL-80132 and is the answer not in the manual?
Questions and answers