Advertisement
Quick Links
Advertisement
Related Manuals for C4i HDM-962
Summary of Contents for C4i HDM-962
- Page 1 HDMI 1.4 Matrix 6×2 User manual V2.3...
- Page 2 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Introduction The HDMI matrix 6*2 with 4kx2k supported which allows HDMI signal from any of its six sources to be routed to and displayed on any of its two connected HDMI displays simultaneously.
- Page 3 Support video format up to 4k2k@30Hz with 24bit RGB/YcbCR 4:4:4/YCBCR 4:2:2, and up to 4k2k@60Hz with 8bit YCBCR 4:2:0, 3D frame sequential video format up to 1080p@60 Support MHL input, Share your smart phone photos, music and movies on the TV. Support PIP display function and ARC function.
-
Page 4: Specifications
Specifications Frequency Bandwidth 2.97Gbps Input Ports 6 x HDMI Female. Output ports 2 x HDMI Female; 1x Toslink; 1x Earphone HDMI Audio Output PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1, D-TrueHD, DTS-HD Power Supply 5V/2A DC (US/EU standards, CE/FCC/UL certified) ESD Protection Human Body Model: ±... - Page 5 Operation controls and Functions Front Panel ON/OFF: Power on/off switch. Input LED: These green LED illuminate when the output select to the corresponding input. EDID LED: These green LED illuminate when the audio EDID select to corresponding audio. ARC LED: This green LED illuminate when the ARC function open. POWER LED: This green LED illuminate when the device is connected with power supply.
- Page 6 OUTB KEY: Press this button to select the input source to HDMI OUT B. EDID KEY: Press this button to select the 2.0CH, 5.1CH, 7.1CH audio output mode. ARC KEY：Press this button to open or close the ARC function. RST KEY: Press this button the matrix will reset to factory state(INPUT1, 2.0CH AUDIO MODE,ARC function closed) IR: Remote control signal receive.
- Page 7 Stereo OUT: This slot is where you connect to the speaker with 3.5mm earphone cable. Toslink OUT: This slot is where you connect to the amplifier with optical fiber cable. DC IN: Plug the 5V DC power supply into the unit and connect the adapter to AC wall outlet.
- Page 8 (2.0CH,5.1CH,7.1CH), and the LED will indicate the corresponding state . ARC: Press this button will Open or close the ARC function, and the LED will indicate the corresponding state. PIP: Press this button will Open or close the PIP function. When open PIP function, the OUTA and OUTB will switch to the same input source.
- Page 9 Otherwise it will output the Matrix input source audio. VII. Application Example...
Need help?
Do you have a question about the HDM-962 and is the answer not in the manual?
Questions and answers