Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for The One Studio TH-344 IP65 PROFILE 300AZ-WW
Summary of Contents for The One Studio TH-344 IP65 PROFILE 300AZ-WW
- Page 1 TH-344 IP65 PROFILE 300AZ-WW IP65 User Manual ①...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS CAUTION Becareful with your operations.With a dangerous voltage you cansuffer a dangerous electric shock when touching wires! This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. - Page 3 Unpacking Thank you for choosing THE ONE STUDIO IP65 PROFILE 300AZ-WW. For your own safety, please read this manual before installing the device. This manual covers the important information on installation and applications. Please install and operate the fixture with following instructions.
-
Page 4: Features And Specifications
FEATURES & SPECIFICATIONS Feature： * 1 * 300W COB LED (Warm White 3200K) * 50,000 hours life time and low power consumption * Optimized high definition optical system for improved photometric performance and field uniformity * Projector-quality, high contrast aspheric lens * Glass reflector that removes greater than 90% infrared radiation (heat) and reflects greater than 95% of visible light * Input Voltage:AC100-240V 50/60Hz... -
Page 5: Dmx-512 Control Connections
DMX-512 CONTROL CONNECTIONS Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the moving head. You can chain multiple Moving head together through serial linking. The cable needed should be two core, screened cable with XLR input and output connectors. - Page 6 COMMON 1:Ground DMX+ 2:Data(-) 3:Data(+) DMX- DMX Input 3-Pin XLR DMX512 Out DMX512 In 3-Pin XLR 3-Pin XLR 120Ω Pin3 Pin2 For installations where the DMX cable has to run a long distance or is in an electrically noisy environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption of the digital control signal by electrical noise.
-
Page 7: Product Feature
Product Feature 2 kinds of running model External control mode (Slave model) DMX 512 controller control(2 kinds channel modes) Master/salve model control (auto match the signal from controller and the Master light, no need to set by menu) ... -
Page 8: Operation Status
Main Menu 6.1 Main Menu Reverse Display Running Status Vice Menu Button 6.2 Operation Status Mode Display Description DMX Mode Axxx “A”stand for standard channel mode, “xxx”stand for ID address, Auto identify Master-slave controller signals or host signals Dxxx “D”stand for basic channel mode, “xxx”stand for ID address, Auto identify controller signals or master signals Manual S-MC... -
Page 9: Dmx Settings
Vice Menu DMX Settings Menu Operation Option Description DMX Start Address Press key of “OK” enter to 1~512 edit mode, press “UP” and ”down” to edit the DMX address DMX Profile Press key of “OK” change 14CH Standard Channel Mode the DMX channel mode 1 CH Basic Channel Mode... - Page 10 Settings Menu Operation Option Description Touch Screen Calibration Touch screen adjust Reset Calibratioin Reset correction Dimmer Frequency Change 500Hz dimmer ..frequency 25000Hz Dimmer Curve Change dimmer Standard curve Incandescent Linear Quick Over Temperature Temperature 45-95 Each 5 for increase or setting decrease Backlight...
-
Page 11: Dmx Channels
DMX CHANNELS Standard channel mode(14CH) Channel Data Function Remark 0~255 Dimmer 0~10 No function 11~255 Strobe Speed(255 fastest) 0~255 M1, M2 position control 0~63 M1, M2 Control straight up and down by channel 3 64~127 M1, M2 Angle adjustment(big data, big angle) 128~191 M1, M2 back to original position... -
Page 12: Operation & Specifications
OPERATION & SPECIFICATIONS ·The PROFILE 300W is for on-site decoration purpose. · Don't turn on the fixture if it's been through severe temperature difference like after transportation because it might damage the light due to the environment changes. So make sure to operate the fixture until it is in normal temperature. - Page 13 A secondary safety point is any point that will adequately hold the led profile spotlight if the "C" clamp or half cheesboro fails. Then the safety cable would be the backup and stop the fixture from falling to the ground. So do NOT fix the safety cable to the same place that the "C"clamp is attached Safety Cable Safety Clamp...
-
Page 14: Cleaning And Maintenance
Cleaning and maintenance Now ignoring maintenance and cleaning is very good way of creating problems "down the road" and many companies and installations do just that. However the net result is, no matter what the fixture, premature failure! Changing the oil in a car, most people do on a regular basis. So with the fixtures, regular maintenance it an excellent practice, if you want the fixtures to last. - Page 15 Company: THE ONE Studio & Stage Lighting Factory ADD: Jinle Industrial Park,Middle Pingbudadao Road, Huadu District, Guangzhou, China Tel : +86 20 36881185 E-mail: sales1@theonelights.com Website: www.theonestudio.com.cn ⑮...