Page 1
Installation manual NEOREST Hybrid (Toilet bowl) NEOREST Hybrid ・・・・・・ P .2 Safety Cautions/Precaution before installation / ・・・・・・・・・・・ P .3 / ・・・・・・・・・・・ P .4 Included parts/ / ・・・・・・・・・・ P .5 Part diagram/ / ・・・・・・・ P .5 Installation procedure/ / ・・・・・・・ P .6...
Install the product properly according to this installation manual for best performance. When the installation work is complete, give a detailed explanation of how to use this product to the customer. Safety Cautions (Observe these cautions for safety’s sake. ) Read these “Safety Cautions”...
Installation procedure / (Unit : mm) (For 95 mm projection of water drain pipe) (Unit : mm) Water supply Rc1/2 Water drain pipe For water supply from the wall 115±10 120〜155 95±10 115±10 Water supply Rc1/2 For water supply from the floor PVC water drain pipe Water drain pipe 120mm...
Page 8
ø8 ø8 Caution Insert the head of the hexagonal bolt completely in the hexagonal hole of the water drain socket. If it is not inserted completely, the toilet Required bowl may be unstable.
Page 9
Mount the top unit according to the installation manual. (Unit : mm) Toilet bowl inner surface Toilet bowl outer surface Silicon sealant...
Page 10
• After a trial-run (flushing), check the toilet bowl for foreign matter such as pipe cuttings, etc. Otherwise, foreign matter such as rust may be deposited in the toilet bowl. • Be sure to close the water supply valve and clean the water supply filter after a trial-run.
Need help?
Do you have a question about the NEOREST Hybrid and is the answer not in the manual?
Questions and answers