Advertisement
HERITAGE PARK5-Piece Folding Dining Set - Table
Stock#: MS49-301-001-01/MS10-301-001-01
NOTE: Do not completely tighten bolts until all steps are completed.
Do not use umbrella without an umbrella base/weight!
Use of umbrella without base can cause table to tip-over in any wind and break the glass.
The wrench for the self-drilling screw is not included.
Fig.2
CC
C
C
A
Step 2: Attach the connecting ring (B) to the four table legs (C)
by liningup the corresponding bolt holes.
Insert M6x55 bolt & washer (BB), through the table leg (C),
through the connecting ring (B), through M6 washer (EE)
and secure with an M6 nut (DD).
Repeat procedure for M6x35 bolt & washer(AA).
Insert the screws (CC) to the corresponding screw holes on the
four corners of the glass table top (A).
Do not completely tighten. Please see Fig. 2.
WARNING
DO NOT USE UMBRELLA WITHOUT UMBRELLA BASE/WEIGHT !
TO USE ANY UMBRELLA WITH A DINING TABLE REQUIRES A MINIMUN 26
LB/12 KG UMBRELLA BASE/WEIGHT – SOLD SEPERATELY.
USE OF UMBRELLA WITHOUT BASE CAN CAUSE TABLE TO TIP-OVER.
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at (866) 905-4107, 8:30 a.m. – 5:00 p.m. PST /11:30 a.m.- 8:00 p.m., EST, Monday- Friday.
Walmart Assembly Instruction
C
EE
B
AA
BB
EE
C
A
Fig.3
DD
DD
B
Step 3: Secure by completely tightening all bolts with
Allen wrench (FF) and open hex wrench (GG).
Set the table upright.Check alignment of the table legs
and adjust as needed.
Please see Fig. 3.
Advertisement
