DIODE LED NEON BLAZE Installation Manual

IP65
DIMMABLE
SAFETY & WARNINGS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. Install in accordance with national and local electrical code
regulations.
2. This product is intended to be installed and serviced by a
qualified, licensed electrician.
3. Do not modify or disassemble this product beyond instructions
or the warranty will be void.
4. Do not use if there is any damage to the fixture or wiring.
Inspect periodically.
5. Do not submerge Strip Light in liquids or use the product in
the vicinity of standing water or other liquids.
6. Do not install near areas with exposure to chlorinated water.
(Salt water environments are approved)
7. All plastics are affected by the elements and may shift in color
and other properties after product installation, particularly with
direct exposure to sun, chlorinated water, and other chemicals
8. Do not attempt to fix this product in the field.
9. Failure to follow safety warnings, and installation instructions
will void the warranty for this product.
NEON BLAZE 24V LED Strip Light INSTALLATION GUIDE
™
NEON BLAZE
®
24VDC
DRY/WET LOCATION
Top bending
™
24V LED Strip Light
Side bending
QUICK SPECS / MODELS
Input
Power
Ambient
Temp †
Environment Indoor/Outdoor/IP65
† Do not install product in environment outside
listed temperature.
*NOT FOR USE IN SUBMERSIBLE APPLICATIONS, OR
WITHIN 5 FEET OF A SWIMMING POOL.
1 OF 8
INSTALLATION GUIDE
24VDC Constant Voltage
1.2w/ft. / 2.7w/ft. / 4.4w/ft.
-4° - 122°F (-20° - 50°C)
IG082119-9.0