Step 3 Replace Engine Access Panel; Step 4 Install Igniter Battery - Charmglow 200605 Owner's Manual

3
Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Step 13 – Replace Engine Access Panel
• Slide Igniter wire onto Igniter post .
• Slide tab at top of Access Panel into slot in Emitter bottom .
• Rotate Panel down until holes line up at bottom .
• Secure Access Panel in place with thumbscrew .
• Replace Control Knob .
Step 14 – Install Igniter Battery
Note: This step is required only for models with electronic ignition .
• Remove battery cover cap by turning cap counterclockwise .
• Install () AA battery . Negative end of battery goes in first .
• Replace battery cover cap by turning cap clockwise .
Note: Once you have successfully completed assembly steps -4 you
are ready to begin operating your heater .
Owner's manual: model 200605 outdoor patio heater