1.1 General The operating instructions is used for safe operation of the Stud Guns (in the following referred to as “gun“) type Automatic Stud Gun EP-12 and EP-15 (ID- No. 100264, 100265)). The safety instructions included hereinafter must be observed.
• disregard of this operating instructions. 1.5 Warranty Conditions of warranty: see Standard Terms and Conditions of OKU Systems GmbH & Co. KG. Assert warranty claims against OKU Systems GmbH & Co. KG immediately after detection of the defect.
Warns of a potential, very haz- ardous situation. Consequences if disregarded: Death or very severe injuries Warning for a general dan- Caution! Warns of a potential hazard- ous situation. Consequences if disregarded: Light or minor injuries OKU Systems GmbH & Co. KG, 73650 Winterbach, Germany...
Page 7
Ambient damage or damage of the gun. Other information Icons used Meaning Signal words Notes General note Note! Designates a general, useful note. Adherence hereof will ease the use of the gun. OKU Systems GmbH & Co. KG, 73650 Winterbach, Germany...
83 dB(A). Provide suitable ear protection for the operator. 3.4 Ambient conditions Use the gun only in closed and dry rooms. The permissible ambient temperature during operation is from 10 °C to 40 °C. OKU Systems GmbH & Co. KG, 73650 Winterbach, Germany...
Screw provided coupling (1) onto the hand grip. Plug compressed air hose into coupling. The gun requires compressed air with approx. 7-8 bar working pres- sure. The maximum operating pressure amounts to 10 bar. Coupling (1) for com- pressed air connection OKU Systems GmbH & Co. KG, 73650 Winterbach, Germany...
Tip! Put some pressure onto the gun when inserting the studs. With some practice and skill you’ll soon find the respective pressure which shall be applied to reach a steady result. OKU Systems GmbH & Co. KG, 73650 Winterbach, Germany...
5.2.1 Studs inserted to deep Reduce the pressure applied on the gun during insertion. 5.2.2 Studs jut out off the tire Put more pressure onto the gun when inserting the studs. OKU Systems GmbH & Co. KG, 73650 Winterbach, Germany...
(27) is riveted with the separating flap (26). Grind off closing head and drive off separating pin with a drift punch. Replace and rivet separating pin. Assemble the gun in reversed order. OKU Systems GmbH & Co. KG, 73650 Winterbach, Germany...
We are working with water to insert the studs, therefore the head of the gun shall be sprayed regularly with anticorrosive material to avoid corrosion and extend lifetime of the gun. OKU Systems GmbH & Co. KG, 73650 Winterbach, Germany...
English Stud Gun EP-12, EP-15 8 Shutdown and dismounting OKU takes back your gun. We recommend you have OKU professionally dis- mantle the gun and dispose of it. Tip! Be part of the environmental protection by recy- cling valuable materials.
9.2 Handling of order To ensure punctual handling of orders, please state always the OKU-ID.-No. of the spare part you need when ordering. You’ll find the OKU-Id.-No. on the drawing of the gun and the spare parts list. 9.3 Explanation of spare parts list The numbers on the exploded drawing correspond to the item numbers of the spare parts list.
100 ml (single) 00885028 grease, tube 20 g (single) 20015510 1 aerosol can corrosion preventive-oil (100 ml) and 1 tube grease (20 g) as maintenance-set = included in the spare parts-set OKU Systems GmbH & Co. KG, 73650 Winterbach, Germany...