&Tradition SHUFFLE TABLE MH1 Assembly Instructions

By mia hamborg

SHUFFLE TABLE MH1

by Mia Hamborg

ASSEMBLY

INSTRUCTIONS

andtradition.com

Congratulations on choosing this Shuffle

table, designed in by Mia Hamborg. We

hope you will enjoy using this table and

follow these instructions to ensure correct

assembly. If you have any questions or

comments, please do not hesitate to

info@andtradition.dk

Table of Contents

Need help?

Do you have a question about the SHUFFLE TABLE MH1 and is the answer not in the manual?

Page 1 SHUFFLE TABLE MH1 by Mia Hamborg ASSEMBLY Congratulations on choosing this Shuffle table, designed in by Mia Hamborg. We INSTRUCTIONS hope you will enjoy using this table and follow these instructions to ensure correct assembly. If you have any questions or...
Page 2 Contents: A - Table top B - table building blocks x 5 C - Table pillar D - Base 4 x Screws Please read these instructions carefully and retain them for future reference to ensure that the table is correctly assembled, should it be moved or sold.
Page 3 Push the table pillar through the hole in the base as shown in the diagram. Use the four included screws to assemble the bottom of the pillar to the base. Apply pressure to the bottom of the pillar while tightening the screws so that they grip into the soft MDF base.
Page 4 KONGEVEJEN 2. DK-3480 FREDENSBORG. DENMARK. T. +45 39200233 F.+45 39200256 INFO@ANDTRADITION.DK WWW.ANDTRADITION.COM...