FASTIME 5010 Manual

Stopclock

Instructions For the Fastime 5010 Stopclock: With Timer, Clock and

optional Decimal minute functions

To set the clock and date:

Slide the switch to the CLOCK SET position

To set the time, press and hold the hour and minute buttons separately to fast forward

to the correct time. Press the second button to zero the seconds display.

To change between 12 and 24 hour displays, press the SPLIT/RESET button

To set the date display, press the START/STOP button to alter the display.

To adjust the day/date and month, press the HOUR, MINUTE and SECONDS buttons

To set the alarm:

Slide the switch to the ALARM position.

Set the alarm by pressing the HOUR & MINUTE buttons

Set the alarm function by pressing the RESET button. The alarm sign will show on the

left of the display.

To turn the alarm sound off, press either of the top buttons

To turn the alarm function off, with the slide switch at ALARM, press the SPLIT/RESET

button

To operate the Stopclock:

Slide the switch to the COUNT UP position.

There are 4 modes selectable by pressing the HOUR button

STW

STW +1/100s

STW + DMS

= 1/100

STW + DM

= 1/100

The count up function operates using the START/STOP buttons with a lap option by

pressing the SPLIT/RESET button.

When the lap is being held the display shows SPL above the seconds display. To

restart the count up after the lap time has been noted, press the SPLIT/RESET button.

To stop and set the time back to zero, press the START/STOP button and then the

RESET button.

Remove the battery cover and fit the R14 battery

into the correct position. Replace the battery cover

1 second to 23 hours, 59 minutes, 59 seconds

1/100

second to 59 minutes, 59.99 seconds

second to 9999.99 seconds

minute to 1999.99 minutes

Table of Contents

Need help?

Do you have a question about the 5010 and is the answer not in the manual?

Page 1 Instructions For the Fastime 5010 Stopclock: With Timer, Clock and optional Decimal minute functions Remove the battery cover and fit the R14 battery into the correct position. Replace the battery cover To set the clock and date: Slide the switch to the CLOCK SET position To set the time, press and hold the hour and minute buttons separately to fast forward to the correct time.
Page 2 To operate the Memory Timer: Slide the switch to the TIMER position Press the HOUR MINUTE & SECOND buttons to set the time period required. If an error occurs in setting, press the RESET button and start again. The memory facility will display MEM on the right of the display, after setting the unit and before pressing the START button.