1 – Fleck 5600sxt metered valve 1 – 1” Threaded Yoke 1 – Bypass 1 – Blue 602abcWATER bag (ABCwaters brand listings only) 1 – Small tube of silicone lubricant 1 – Sanitizer packet 1 – Water hardness test strip * Not included but required –...
Page 3
Valve to Mineral Tank Step 2 – Plan Your Water Softener Location Plan where to position your water softener system: 1. Position 5 ft. from power source to operate 2. Requires water drain for disposing of water 3. Requires access to home’s main water line Step 3 –...
Page 4
Meter & Valve Assembly Step 4 – Connect Bypass to Fleck Meter 1. Apply silicone lube to the 2 ‘o’-rings on the valve and make connection. We also recom- mend applying silicone to the inside of the female end on the bypass valve. 2.
Page 5
Attach Tank Lines Step 6 – Attach Drain Line to Fleck Meter 1. Wrap threaded connection point with 3-4 wraps of Te lon tape. Install provided plastic barbed itting. 2. Install drain line (not included) to barbed itting (found on Fleck valve) with a stainless hose clamp (not included).
Page 6
Step 11 – Connect Meter to Power Source 1. Plug in the Fleck 5600sxt digital meter to a power receptacle. Your power source should be less than 5 feet in distance from the Fleck meter.
Page 7
Programming Step 1 – Con irm All Product Components 1. Add 3 bags of salt pellets or rock salt along with 5 gallons of water to the brine tank. * Add only 2 bags if using a SPACE SAVER system. Programming Your Hardness Water Softener Step 1.
Page 8
Contact 602abcWATER Our company is managed by water professionals with over 25 years of com- bined experience. Our goal is to provide you and your family with the best equipment available in the industry, offer a support experience that is sec- ond to none and have fair pricing that everyone can afford.