Safety And Instructional Decals - Toro 38472 Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Cutting/dismemberment hazard, impeller;
cutting/dismemberment hazard, auger—do not
place your hand in the chute; remove the key and read the
Operator's Manual before performing maintenance.
1. Warning—read the Operator's Manual.
2. Cutting/dismemberment hazard, impeller—shut off the engine
and wait for the auger to stop before leaving the machine.
3. Thrown object hazard—keep bystanders away.
117-6047
1. Primer
decal117-6047
2. Push the primer 2 times to
prime the engine.
3. Push in the key to switch
the engine on.
117-7713
4. Explosion hazard—do not tip machine forward or backward.
5. To engage the auger, squeeze the control bar.
6. To disengage the auger, release the control bar.
4
120-0149
4. Pull the key to switch the
engine switch off.
5. Remove the key to lock
the machine.
6. Read the Operator's
Manual before checking
the engine-oil level.
133-8061
decal120-0149
decal133-8061
decal117-7713