Troubleshooting - Biochef Axis User Manual And Recipes

Troubleshooting

The motor
sounds noisy,
what shall I
do?
What shall I
do if I've lost
the original
tamper?
My juice is too
pulpy?
1. If the juicer starts to vibrate slightly during
operation, turn off the machine and empty the drum
set. Re-assemble and resume normal operation.
2. If your machine is making a loud noise, take all the
extra parts off the machine and run the motor alone.
If it is still making a loud noise then contact your
distributor.
3. If the motor is not making a noise, check that all
parts and seals are clean, as residue may create a
noise.
4. Check the kind of produce you are using, as
some kinds of produce are noisier than others, for
instance, if your produce is particularly hard or has
been frozen or refrigerated.
Call your distributor and order a new part. It is very
important to use the correct plunger/tamper for the
machine as they are made to fit each juicer precisely.
Using any other type of plunger / pusher
PLEASE NOTE
or tamper will void warranty as the length and width of
the BioChef tamper is specific to this machine.
1. Adjut the pulp adjustment nozzle to number 4 or 5.
2. Introduce ingredients at a slower pace. Overfeeding
the juicer can result in pulpier juicer.
3. Ensure that your ingredients are fresh. Older
vegetables have less water content and can
produce a pulpier juice.
EN
9