Page 1
• Important - Do not overtighten the screws. • Only hand tools should be used for assembly. Do not use power tools. • ECCB Outdoor will not be liable for any injury or damage resulting from improper assembly and/or use of this product.
Page 2
Parts Make sure you have received everything. If anything is missing or damaged, please contact our service department at support@eccboutdoor.com. Back - 1 pc Seat - 1 pc Arms - 2 pcs 1 Right 1 Left Top view of arms Side view of arms Rocker Bottoms - 2 pcs Brace - 1 pc...
Page 3
Let’s Get Started! Step 1 - Attach the Seat to the Arms • Line up the top holes in the arms (C) to the holes on the side of the seat (B) • Attach the arms (C) to the seat (B) using the hardware shown below * You will first have to remove the hardware from those holes Lay the seat on its side when attaching the arms...
Page 4
Step 3 - Attach the Rocker Bottoms • Position the rocker bottoms (D) to the outside of the arms (C). Make sure the short end of the rocker bottoms are facing front • Attach the rocker bottoms using the hardware shown below * You will first have to remove the hardware from those holes Step 4 - Attach the Bottom Brace •...