Advertisement
Quick Links
Adirondack Rocker
(This style is used for instructions)
Important
Please Read All Instructions Carefully Before Assembling This Product
• Inspect all parts to make sure that nothing is broken or missing. If something is broken
or missing, please contact our service department at support@eccboutdoor.com.
• The rocker must be completely assembled before attempting to use it. Failure to do so
could result in damage to the chair or the user.
• Use proper safety gear and follow appropriate safety precautions when assembling this product.
• Important - Do not overtighten the screws.
• Only hand tools should be used for assembly. Do not use power tools.
• ECCB Outdoor will not be liable for any injury or damage resulting
from improper assembly and/or use of this product.
• Failure to follow all instructions will result in the product warranty being voided.
ECCB
O U T D O O R
Congratulations on the purchase of your new poly
lumber rocker. These easy step-by-step instructions can
be used for assembling any of the following rockers.
966 Perry Highway, Mercer, PA 16137 • Phone (800) 687-5086
ECCBOutdoor.com
Assembly Instructions
Rockers
Harbor Rocker
Lake Shore Rocker
V2
Advertisement
Related Manuals for ECCB OUTDOOR Adirondack
Summary of Contents for ECCB OUTDOOR Adirondack
- Page 1 • Important - Do not overtighten the screws. • Only hand tools should be used for assembly. Do not use power tools. • ECCB Outdoor will not be liable for any injury or damage resulting from improper assembly and/or use of this product.
- Page 2 Parts Make sure you have received everything. If anything is missing or damaged, please contact our service department at support@eccboutdoor.com. Back - 1 pc Seat - 1 pc Arms - 2 pcs 1 Right 1 Left Top view of arms Side view of arms Rocker Bottoms - 2 pcs Brace - 1 pc...
- Page 3 Let’s Get Started! Step 1 - Attach the Seat to the Arms • Line up the top holes in the arms (C) to the holes on the side of the seat (B) • Attach the arms (C) to the seat (B) using the hardware shown below * You will first have to remove the hardware from those holes Lay the seat on its side when attaching the arms...
- Page 4 Step 3 - Attach the Rocker Bottoms • Position the rocker bottoms (D) to the outside of the arms (C). Make sure the short end of the rocker bottoms are facing front • Attach the rocker bottoms using the hardware shown below * You will first have to remove the hardware from those holes Step 4 - Attach the Bottom Brace •...