Installation; Programs - DekoLight 732075 Product Notes Manual

Product-Notes
Manual
Article No.: 732075

9. Installation

1. Connect Touch-Controller with the RGB RF Flood Light
a. Switch on the Power of the Flood Light and push and hold the "ON" button within 1 sec. on the
Touch-Controller, after that the LED flashes up 3 times, then the Touch-Controller and the Flood Light are
connected.
b. If this step isn't working please try again.
2. Disconnect Touch-Controller from the RGB RF Flood Light
a. Switch on the Power of the Flood Light and push and hold the "ON" button within 1 sec. on the Touch-
Controller, LED flashes up 9 times, then the Touch-Controller and the Flood Light are disconnected.
b. Now you can address the Flood Light again with the same or another Touch-Controller.

10. Programs

● White
● Red
● Green
● Blue
● Fade In Fade Out
● Ramp Up
● Ramp Down
● Color Flash
● Shop Window
● White Strobe
● Color Change
● Disco
● Fire
The product is CE compliant and meets all the essential requirements of Directive 2014/53/EU RED.
The CE Declaration of Conformity for this product can be obtained at the following address.
Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / deko@deko-light.com
Technical Data can be changed without advance notice. Errors excepted.
https://shop.deko-light.com/
26.09.2018
1 / 6