Reactor clr series active cab/ active wedge/ passive cab/ passive wedge (12 pages)
Summary of Contents for Atomic Pro XL12
Page 1
XL12 & XL15 Active Speakers XL12 & XL15 Instruction Manual CAUTION - ATTENTION - VORSICHT RISK OF ELECTRIC SHOCK- DO NOT OPEN RISQUE D’ELECTROCUTION - NE PAS OUVRIR STROMSCHLAGGEFAHR - NICHT OFFNEN In Compliance with the following directives: RoHS Directive (2002/95/EU) and WEEE directive (2002/96/EU) If this product is no longer functional or reached the end of its usable life, please take it to an approved recycling plant.
Page 2
User Manual XL12 & XL15 Dear Customer, Thank you for purchasing this Atomic XL active speaker. With decades of experience in design and production, Atomic is one of the leading manufacturers of professional audio equipment. This unit has been designed and manufactured to the highest of standards so you can be assured you have made a good investment.
Page 3
• Choose a suitable route for mains cables and audio cables, ensuring trip hazards are avoided and any cables are not at risk of being crushed. • Do not open this unit to service. There are no user serviceable parts inside. Any servicing or repairs should be carried out by a qualified engineer only.
Page 4
Functions Back Panel 1 Bluetooth Pairing: • Press and hold the pair button until status LED flashes fast and a ❶ beep can be heard from the speaker. • Look on your Bluetooth device for the name BP1712A16 or BP1715A16, then connect to the one of these that is listed. ❷...
Page 5
Input Connections Always use a good quality screened cable. Make sure soldering has been done correctly, bad solder joints can cause damaged or intermittent faults to occur. Try to always use balanced connection, if this is not possible try to keep unbalanced cables as short as possible. See the connector wiring chart below when wiring connectors.
Need help?
Do you have a question about the Pro XL12 and is the answer not in the manual?
Questions and answers