Biostar A68N-2100E Manual page 8

Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot
such that the notch on the DIMM matches the break on the slot.
Step 2: Insert the DIMM vertically and firmly into the slot until the retaining clips snap back in
place and the DIMM is properly seated.
Note
» If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
Memory Capacity
DIMM Socket Location
DDR3_A1
DDR3_A2
Note
» When installing more than one memory module, we recommend to use the same brand and
capacity memory on this motherboard.
8 | Chapter 2: Hardware installation
DDR3/ DDR3L Module
512MB/1GB/2GB/4GB/8GB
512MB/1GB/2GB/4GB/8GB
Total Memory Size
Max is 16GB.