Vacron VVH-MDE52 Manual

Vehicle Surveillance Camcorder
4 C H D V R / A l l i n o n e 4 C H Ve h i c l e S u r ve i l l a n c e C a m c o rd e r
720P / 360º / 4ch
VVH-MDE52 (Vehicle DVR)
4CH
DVR
720P
30/25 FPS
AVM-1276 (Vehicle Cam)
360°
720P
View 360°
4 LEDs
LENS 1 M
Mobile DVR Dimension
1 2 3 4
(1). Power Light (2). Recording Light
(4). GPS Light (5). IR receiver
10
7 8 9
(7). GPS Connector: For connect with G-Mouse to use GPS function.
The GPS function includes record vehicle location, speed, longitude
and latitude.
(8). EXT: Video output jack, connect with parking assist camera
(9). MIC: Microphone jack, connect and record audio with microphone.
(10). Camera Connector: Connect with dedicated vehicle camera,
which able to record 360°surrounding view.
(11). Alarm Input: Alarm input connector, use by parking assist camera.
(12). Camera Connector: Connect with dedicated vehicle camera, which
able to record 360°surrounding view.
(13). IR Extension Cable Connector: Once upon connecting with the
extension cable, the IR receiver will only receive signal from
extension cable, cannot control by remote controller.
(14). Power Connector: To cooperate with power management function
(in OSD), it can provide delay shut down function.
Power Cable (Black/Blue/Red)
1. Positive Port (Red cable): DC8~32V power input.
2. ACC Control (Blue cable): Can setup delay shut
down recording after turn off engine.
3. Negative Port(Black cable): GND
Alarm Cable(Black/Yellow)
1. Positive 12V ALARM Input (Yellow cable): Connect
with Positive port on parking assist camera.
2. Negative GND(Black cable): GND
Extending
OPTIONAL
DC 12V
5 6
(3). Wifi Light
(6). SD Card Slot
11 12 13 14
Accessories
Standard Set
(1) Device
(2) Camera
(3) Power cord (black/blue/red)
(4) Alarm cable
(5) IR extension cord
(6) Remote controller
Optional Accessories
(1) USB interface SD card reader.
(2) 4/8/16/32G Class10 above SD card。
(3) GPS Module
(4) USB WIFI
(5) External connect AVM-1250 Vehicle Camera
Safety Precautions
▪ Installation Precautions
1. Make sure power connections clear enough to you before installation.
2. System installation is required professional installers and ventilation space.
3. Please use recommended and genuine storage device.
4. Please contact local dealers in case of service requirement.
▪ In Use Precautions
1. Please keep the inner components off any solid or liquid.
2. Please do not disassemble the equipment for warranty issue. Please contact local
dealers or the manufacturer for prompt service.
3. Please remove the battery if remote control keeps idle for quite a long while.
4. The equipment best connects with ground wire in case of outdoor cameras connection
or alarm I/O connection. This is to keep the DVR away from static electricity damage.
▪ Surrounding
1. Please have the DVR under recommended temperature away from the sun and
heating source.
2. Please keep this equipment away from humid surrounding.
3. Please keep this equipment away from smoke and dust.
4. Please do not drop the equipment.
5. Please keep this equipment in ventilation space.
6. Please supply rated voltage and Amp. To the equipment.
7. Please keep flammable objects away from the equipment.
Vehicle Camera Appearance
6
5
1
4
Vehicle Camera Installation Diagram
1. Install camera on windshield by
adhesive bracket
3. To adjust a best view angle.
5. To connect the other end with the "Video In" slot in DVR.
(7) Microphone
(8) Velcro strap
(9) Double-side3M tape
(10) Bracket mount
(11) CD
(12) Quick start guide
1. Lens 1 (Front)
2. Lens 2 (Right)
3. Lens 3 (Inner)
4. Lens 4 (Left)
2
5. Cable collect slot
6. 3M Double-side tape
3
2. Pick up a best location for
installation.
4. To connect power cable to Mini
USB hole.
H12AE52001